Uploaded January 2019 | Updated November 2026, 4 days ago
We've made it! We are finally going to apply the finish and glue everything up! I prefer to pre-finish, if that's what you want to call it. Which is to say, I apply two light coats of wipe-on poly before gluing up. This helps with clean-up when gluing.
To prep for finish, I do a finishing pass on all the pieces with my smoothing plane, removing as little as possible to not change the fit or geometry. The most important thing is to get everything LOOKING good, not necessarily making it all flat and square. I know that sounds like a sin, but as Diresta says, if it looks square, it is square.
For my finish planing, I get the blade SCARY SCARY sharp. I take it through my normal routine, and then I strop the living daylights out of it. Maybe 100 or more times. Trust me, when you do that, you don't get tear out, almost ever, especially if the mouth of the plane is really tight.
Glue went just OK. It was during the glue-up that I realized the poor design elements, which I would definitely change were I to do this again. But thank goodness, it all went together in the end, thanks to my wife's help!
I'm so happy with the result! Now, on to the drawers, doors, and shelf!
I hope you enjoyed this video!
If you'd like to stay up to date on the real-time progress for the sideboard, check my instagram account, below. There, you'll see that I'm actually moving along at quite the pace, considering I'm not using any electricity except for lighting and heat (ha!) and since I've got a family and a full-time job!
Thanks so much for watching!
I hope you've enjoyed the progress so far!
---
I really do hope you have enjoyed this video. Please feel free to check out my other social profiles.
Instagram: instagram.com/thehandtoolery
Facebook: facebook.com/TheHandToolery
My Etsy Shop: etsy.com/shop/TheHandToolery
Thanks!
Andrew
We've made it! We are finally going to apply the finish and glue everything up! I prefer to pre-finish, if that's what you want to call it. Which is to say, I apply two light coats of wipe-on poly before gluing up. This helps with clean-up when gluing.
To prep for finish, I do a finishing pass on all the pieces with my smoothing plane, removing as little as possible to not change the fit or geometry. The most important thing is to get everything LOOKING good, not necessarily making it all flat and square. I know that sounds like a sin, but as Diresta says, if it looks square, it is square.
For my finish planing, I get the blade SCARY SCARY sharp. I take it through my normal routine, and then I strop the living daylights out of it. Maybe 100 or more times. Trust me, when you do that, you don't get tear out, almost ever, especially if the mouth of the plane is really tight.
Glue went just OK. It was during the glue-up that I realized the poor design elements, which I would definitely change were I to do this again. But thank goodness, it all went together in the end, thanks to my wife's help!
I'm so happy with the result! Now, on to the drawers, doors, and shelf!
I hope you enjoyed this video!
If you'd like to stay up to date on the real-time progress for the sideboard, check my instagram account, below. There, you'll see that I'm actually moving along at quite the pace, considering I'm not using any electricity except for lighting and heat (ha!) and since I've got a family and a full-time job!
Thanks so much for watching!
I hope you've enjoyed the progress so far!
---
I really do hope you have enjoyed this video. Please feel free to check out my other social profiles.
Instagram: instagram.com/thehandtoolery
Facebook: facebook.com/TheHandToolery
My Etsy Shop: etsy.com/shop/TheHandToolery
Thanks!
Andrew










