Uploaded December 2021 | Updated September 2026, 2 weeks ago
๐ง๐๐๐๐๐ฒ๐๐ถ๐ด๐ป, most trusted electronics components marketplace: bit.ly/3Dli4w9
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐ ๐๐ฒ๐๐ฐ๐ฟ๐ถ๐ฝ๐๐ถ๐ผ๐ป:
In this tutorial, we will design our own DIY IoT Based Water pH Meter using a pH Sensor & ESP32 WiFi Module. In some earlier tutorials, we interfaced pH Sensor with Arduino to make a portable ph Meter. The pH reading data was displayed on OLED Screen.
This is a completely different tutorial as we will be using a better and advanced pH Sensor. The pH Sensor used here is an analog type pH Sensor that gives a linear pH reading in 0pH to 14pH range. Instead of displaying the data on an OLED screen, we will send the data to ThingSpeak Server. The ThingSpeak provides instant visualizations of data posted by our device, i.e. ESP32. Since ESP32 is a 12-bit controller with built-in ADC, so it can measure data more precisely compared to Arduino which has a 10-bit ADC.
It incorporates a high-resolution pH probe that samples liquid pH at user-defined intervals and transmits the result to remote servers. The pH probe comes with a 5 long cable and can be dipped in any solution. The response time is lesser than a minute. We can incorporate this IoT Based pH Meter in Aquariums, Hydroponics, laboratories, etc. So let us learn how we can interface pH Sensor with ESP32 & make our own pH meter. The tutorial also covers the pH Sensor Calibration method.
๐ฃ๐ต ๐ฆ๐ฒ๐ป๐๐ผ๐ฟ ๐ฃ๐๐ฟ๐ฐ๐ต๐ฎ๐๐ฒ ๐๐ถ๐ป๐ธ: graylogix.in/product/ph-sensor-kit-for-water
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐๐ ๐๐ถ๐ป๐ธ๐ & ๐ฆ๐ผ๐๐ฟ๐ฐ๐ฒ ๐๐ผ๐ฑ๐ฒ: how2electronics.com/diy-iot-water-ph-meter-using-ph-sensor-esp32
๐ง๐๐๐๐๐ฒ๐๐ถ๐ด๐ป, most trusted electronics components marketplace: bit.ly/3Dli4w9
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: how2electronics.com
Facebook: facebook.com/how2electronics
Instagram: instagram.com/how2electronics
๐ง๐๐๐๐๐ฒ๐๐ถ๐ด๐ป, most trusted electronics components marketplace: bit.ly/3Dli4w9
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐ ๐๐ฒ๐๐ฐ๐ฟ๐ถ๐ฝ๐๐ถ๐ผ๐ป:
In this tutorial, we will design our own DIY IoT Based Water pH Meter using a pH Sensor & ESP32 WiFi Module. In some earlier tutorials, we interfaced pH Sensor with Arduino to make a portable ph Meter. The pH reading data was displayed on OLED Screen.
This is a completely different tutorial as we will be using a better and advanced pH Sensor. The pH Sensor used here is an analog type pH Sensor that gives a linear pH reading in 0pH to 14pH range. Instead of displaying the data on an OLED screen, we will send the data to ThingSpeak Server. The ThingSpeak provides instant visualizations of data posted by our device, i.e. ESP32. Since ESP32 is a 12-bit controller with built-in ADC, so it can measure data more precisely compared to Arduino which has a 10-bit ADC.
It incorporates a high-resolution pH probe that samples liquid pH at user-defined intervals and transmits the result to remote servers. The pH probe comes with a 5 long cable and can be dipped in any solution. The response time is lesser than a minute. We can incorporate this IoT Based pH Meter in Aquariums, Hydroponics, laboratories, etc. So let us learn how we can interface pH Sensor with ESP32 & make our own pH meter. The tutorial also covers the pH Sensor Calibration method.
๐ฃ๐ต ๐ฆ๐ฒ๐ป๐๐ผ๐ฟ ๐ฃ๐๐ฟ๐ฐ๐ต๐ฎ๐๐ฒ ๐๐ถ๐ป๐ธ: graylogix.in/product/ph-sensor-kit-for-water
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐๐ ๐๐ถ๐ป๐ธ๐ & ๐ฆ๐ผ๐๐ฟ๐ฐ๐ฒ ๐๐ผ๐ฑ๐ฒ: how2electronics.com/diy-iot-water-ph-meter-using-ph-sensor-esp32
๐ง๐๐๐๐๐ฒ๐๐ถ๐ด๐ป, most trusted electronics components marketplace: bit.ly/3Dli4w9
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: how2electronics.com
Facebook: facebook.com/how2electronics
Instagram: instagram.com/how2electronics
