Uploaded November 2015 | Updated November 2026, 1 day ago
I built a raspberry-pi controlled RF attenuator. It uses a PE4302 chip to attenuate from 0 to 31.5 dB. The attenuation is displayed on a VFD, and a rotary encoder is used to set the attenuation value. For more electronics stuff, see smbaker.com
I built a raspberry-pi controlled RF attenuator. It uses a PE4302 chip to attenuate from 0 to 31.5 dB. The attenuation is displayed on a VFD, and a rotary encoder is used to set the attenuation value. For more electronics stuff, see smbaker.com










