Uploaded May 2024 | Updated September 2026, 1 week ago

---

Learn how to build your own DIY camper van electrical system in this start to finish tutorial!

Full wiring diagram and link to all parts available here: mosermakes.com/articles/camper-van-standard-electrical-system

Correction: the Renogy combined charger can do voltage sensing for traditional alternators (but it is best to use the ignition signal when connecting to smart alternators in newer vehicles).

↓ Links below to tools used in the install ↓
Large Wire Cutters (up to 4/0 AWG): amzn.to/4batYK1
Smaller Wire Cutters (up to 8 AWG): amzn.to/3wrohZ2
Lug Crimper (10 - 4/0 AWG and larger): amzn.to/3wrndo0
Single Crimp Tool (8-22 AWG): amzn.to/3WzbiiG
Self-Adjusting Wire Stripper: amzn.to/4bx3GSb
Ferrule Crimping tool (28-7 AWG): amzn.to/3Ux7qMv
Large Ferrule Crimper (8-2 AWG): amzn.to/4bygBmV
Heat Gun: amzn.to/3JPUg8m
Torque Wrench: amzn.to/4btF0db
Mounting Zip Ties: amzn.to/4b6FKoF
↑ Links are Amazon affiliate links 👍↑

Sections:
00:00 Intro
01:02 Frame
01:42 Battery bank
06:33 Solar and alternator charger
10:42 Inverter charger
14:19 Distribution panel
17:20 Moving into van
19:30 Alternator charger connections
21:20 Distribution panel completion
23:57 Testing the system

#vanlife #offgrid #electrical