DIY ARTICULATED MAGNETIC CAMERA MOUNT @ROBRENZ
DIY ARTICULATED MAGNETIC CAMERA MOUNT  @ROBRENZ
Uploaded September 2013 | Updated November 2026, 7 minutes ago
Design and build of a DIY articulated video camera mount with a magnetic base.

Paypal donation paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=W64WRAAGMA79J&source=url

Support through Patreon patreon.com/ROBRENZ

I am "robinrenzetti" Instagram lots more content there!


Great synopsis of the video by brs_workshop

"Shop Notes"*
• Inspiration from EEVBlog #493: youtube.com/watch?v=NrpFLN7fTqg
• Description of requirements for the design and use
• NOGA base DG0038(?):
Amazon: amazon.com/NOGA-Magnetic-Holder-Bed-Dimensions/dp/B0006J4A7E
Amazon similar mag but with multiple thread 'cheeseplate': amazon.com/DG1003-Switchable-Off-Magnetic-Bed/dp/B007GSVKBW
KBC Tool: kbctools.com/default.aspx?page=item+detail&itemcode=1-457-DG0038&catlist=21517&parent=9582
McMasterCarr (same specs but no brand listed): mcmaster.com/#1977a15/=19p89y9
• Observance of surface finish on magnetic transfer (grip)
• Moment of inertia and large cross-section members
• Discussion of carbon fiber weave and lay
• Design on camera plate with a 3-bar linkage with detents
• Influence of table vibrations and choice of mounting points
• Build starts @~13m: youtu.be/LWUHlyi-8Mc?t=13m2s
• Plate construction
• Chamfering the inside edges on the lathe
• Ball construction
• Architectural steel balls 18ga
Alternatively you can source hollow ball bearings that should have a better roundness tolerance from the get-go. You'll have to contact the bearing house for more info.
Boca Bearings 63mm hollow bearings: bocabearings.com/products/63mm-hollow-304-stainless-0-8-thick-24904
76mm:bocabearings.com/products/76mm-hollow-304-stainless-0-8-thick-24903
Check with your local bearing house.
• Using Stay-Brite to silver-solder the springs
Harris Stay-Brite Kit (Amazon): amazon.com/Harris-SBSKPOP-Stay-Brite-Silver-Bearing/dp/B0089ETUN2
Harris' website: harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/stay-brite.aspx
• Harris Stay-Silv Black Hi-Temp Brazing Flux
Amazon: amazon.com/Harris-SSBF1-Stay-Brazing-Black/dp/B00EDMM4KU
Harris' website: harrisproductsgroup.com/en/Products/Alloys/Brazing/Fluxes/Stay-Silv-Black-Flux.aspx
• Creating the radius for seating the tubes to the balls
• Lapping spheres: youtu.be/LWUHlyi-8Mc?t=21m14s
Al ring w/bevel, work spun with a cordless drill. Coarse emry paper fitted to ring, then lapping compound
• Using Loctite 243 Blue threadlocker to mount the ring to the base and ball. Everyone that make things with screws should have some blue threadlock.
McMasterCarr link: (243) mcmaster.com/#loctite-243/=19paczr
Amazon link: (243) amazon.com/Loctite-1329837-Medium-Strength-Threadlockers/dp/B004VODM24
Loctite website: (243) na.henkel-adhesives.com/product-search-1554.htm?nodeid=8797710024705&msdsLanguage=EN_US&selectedTab=technical
• Using tie rods (tension) to assemble the ball rods.
• Good silver soldering tutorial @ 27m: youtu.be/LWUHlyi-8Mc?t=27m2s
• Detent head, overview of design and assembly. Links from Al angle 1/8" thick.

*Not affiliated with any manufacturer or distributor. Links just for convenience.
DIY ARTICULATED MAGNETIC CAMERA MOUNTROBRENZ TOOLROOM TIP #1MAKING GROOVING BORING BARSMAKING LINEAR BALL WAY CAGESDIY SURFACE PLATE LAPPING PART 1Restoring Tom Liptons Level FrameROBRENZ ATD #1 INTRO, 3 PLATE METHODADJUSTABLE CHUCK STOPSVACUUM TWEEZER DESIGNBRUSH IN CAN MAGIC TRT#4Keithley 2450 SMU Review Part 1MAKING ULTRA PRECISION TOOLROOM SPINDLES #2
ROBRENZ |

DIY ARTICULATED MAGNETIC CAMERA MOUNT

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER