MAKING LINEAR BALL WAY CAGES @ROBRENZ
MAKING LINEAR BALL WAY CAGES  @ROBRENZ
Uploaded August 2018 | Updated November 2026, 20 minutes ago
Design and build of linear ball way cages for my Mitsui surface grinder rebuild. Including special clamps and rail system for long thin parts and a precision die for cutting reticulated foam

Paypal donation paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=W64WRAAGMA79J&source=url

Support through Patreon patreon.com/ROBRENZ

I am "robinrenzetti" Instagram lots more content there!

"SHOP NOTES" contributed by brs_workshop
• Overview of the old ball cages, condition and design considerations
• Switching from grease to oil lubrication
• SolidWorks(?) explanation of design.
• @7m ""Just enough of a drawing""
• Delrin to wood transfer adhesive test. A study quick-and-dirty workholding of awkward pieces, fully explained and tested with a force gage.
• 3M 467 Adhesive Transfer tape:
McMasterCarr (60yd): mcmaster.com/#adhesive-transfer-tape/=19s264m
Amazon (.5 in/20yd): amazon.com/dp/B007Y7CQ1S
(other sizes): amazon.com/467MP-Performance-Adhesive-Transfer-0-125/dp/B00P26Z04I
3M's website: 3m.com/3M/en_US/company-us/all-3m-products/~/3M-Adhesive-Transfer-Tape-467MP?N=5002385+3293242532&rt=rud
• 3M F9460PC Adhesive Transfer tape: (not to be confused with others that contain the same number)
McMaster (.5 in/60yd): mcmaster.com/#7628a52/=1e6ps96
Amazon (.5 in/5yd): amazon.com/3M-Tape-F9460PC-width-length/dp/B007Y7DA68
3M's website: 3m.com/3M/en_US/company-us/all-3m-products/~/3M-VHB-Adhesive-Transfer-Tape-F9460PC/?N=5002385+3293242476&rt=rud
• 3M Plastic Adhesive Transfer tape:
Not sure which one is shown, probably 9482PC (2mil) or 9485PC (5mil)
McMaster (PPE bonding): mcmaster.com/#adhesive-transfer-tape/=1e6pv59
3M's Website (9482PC): 3m.com/3M/en_US/company-us/all-3m-products/~/3M-Adhesive-Transfer-Tape-9482PC/?N=5002385+3293241523&rt=rud
• Wagner FDX Force Gages: wagnerinstruments.com/products/force-gages/digital-force-gages/force-ten-fdx
• NOGA Ceramic Blade Plastic Deburring Tool, CR 1500 or 2000:
McMaster: (CR2000, maybe): mcmaster.com/#6074a36/=1e6vzt7
Amazon (CR2000): amazon.com/NOGA-Ceramic-Deburring-Tool-Set/dp/B002718Y26
KBC (CR2000): kbctools.com/products/ABRASIVES/DEBURRING%20TOOLS/HAND%20DEBURRING%20TOOLS/10954.aspx
Noga: noga.com/Products/cera/Ceramic%20tools/CR1500/Mini_Ceramic_Handle_and_Convexed_Blade_-_CR1500
• Notice the 'fence' or alignment pins in this fixture are deburring tools.
• Explaining ball deflection, Hertzian stresses in a ball way.
• Making improved clamps from ViseGrips.
ViseGrip 9LN 9 in. ""Long Nose"" (Made in China):
Amazon: amazon.com/Irwin-15-9LN-8-Inch-Capacity-9-Inch/dp/B00004SBB2
Harbor Freight (also Made in China):
harborfreight.com/hand-tools/pliers/9-in-long-nose-locking-pliers-63871.html
• Tip about evenly wearing your abrasives by watching the spark pattern.
• Nylon Deburring Brush Wheel:
McMaster: mcmaster.com/#4901a56/=1e6wp6m
A number of other brands available from retailers.
• 3M Strip Caulk 08578:
Amazon (20yd): amazon.com/3M-08578-Black-Strip-Calk/dp/B000PEZ1L4
3M's site: 3m.com/3M/en_US/company-us/all-3m-products/~/3M-Strip-Calk/?N=5002385+3293194020&rt=rud
• Apprentice = broach catcher
• Haircell finish plastics
• Ever wonder what that application pressure is? Well, from 3M's datasheet on 467MP it's 10-15 psi.
• Tapping head is a SPV (Spintec) SA-0E. I can't find the model on their website.
• #0000 Stainless Steel Wool for Deburring hard plastics
• Creating a foam die cutter
• 100 pore-per-inch reticulated (open cell) foam.
• Techniques for facing accurate rings of triangular cross-section. Cubic Boron Nitrite turning tool reground.

*Not affiliated with any distributor or manufacturer. Links for reference & convenience only.
MAKING LINEAR BALL WAY CAGESDIY SURFACE PLATE LAPPING PART 1Restoring Tom Liptons Level FrameROBRENZ ATD #1 INTRO, 3 PLATE METHODADJUSTABLE CHUCK STOPSVACUUM TWEEZER DESIGNBRUSH IN CAN MAGIC TRT#4Keithley 2450 SMU Review Part 1MAKING ULTRA PRECISION TOOLROOM SPINDLES #2trex 500 rudder pushrod forceVibe 50 & 90 pushrod force testT250 Preload spacer assembly
ROBRENZ |

MAKING LINEAR BALL WAY CAGES

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER