Diffusers @MrAudioSoundImages
Diffusers  @MrAudioSoundImages
Uploaded December 2013 | Updated November 2026, 2 days ago
When sound is reflected between two parallel surfaces, a standing wave pattern is produced. The resonant frequency of the standing wave is equal to the speed of sound divided by the distance between the parallel surfaces.

Standing waves producing resonant frequencies can be an issue in recording studios. In the recording room with the musicians, they can produce strange-sounding resonances. In the control rooms they can cause the mix engineer to try to correct for a problem that may not exist. That is, the mix engineer might add EQ to help cut frequencies that are enhanced or boost frequencies that are eliminated by the standing waves in the control room.

One way to eliminate the standing wave pattern is to eliminate the parallel surfaces. However, if that isn't possible, another solution is to use a diffuser.

One type of diffuser has multiple compartments that eliminate the parallel condition by varying the depth of each compartment. Since deeper ones cause the sound to be reflected later than in the shallower ones, these diffusers create time delays within the reflection and eliminate the standing wave.

Another type of diffuser uses poly-cylindrical or other angled shapes to bounce the sound in different directions to eliminate the parallel reflections.

Both types of diffusers can work well to eliminate the standing wave patterns created by parallel surfaces.
DiffusersAutolocatorDATSampling RatesTuning InstrumentsChase-InterlockThe First Digital Audio WorkstationFilm SpeedThe SlateAmp ModelingNoise BarrierMic Preamp
MrAudioSoundImages |

Diffusers

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER