Uploaded January 2026 | Updated November 2026, 5 days ago
Can we save this Unifi U6 Lite from the landfill? In today's video, I take a look at a defective Ubiquiti Unifi U6 Lite access point I scored for around €27. The seller claimed they could no longer "control it," but upon arrival, the unit wouldn't even boot, pulling a mere 1.6W from the wall with no LED activity.
We’ll dive deep into the PoE circuitry, identifying the TPS2376 controller and the LM76003 buck regulator. I'll show you my process for "educated guessing" on voltage injection and how a thermal camera revealed an incredibly cheap and sneaky culprit: a shorted MLCC capacitor.
→Tools I used in this video
Guide IR E2+ Thermal Camera youtu.be/vXxPVfVMdvs
Sugon 8650 Hot Air Station youtu.be/JD3lpJCURqA
Genuine STIRRI flux from Eleshop voltlog.com/y/jregv
→Useful links
U6-Lite AP details techspecs.ui.com/unifi/wifi/u6-lite
LM76003 datasheet ti.com/lit/ds/symlink/lm76002.pdf
→Support the channel via Patreon, Paypal or Bitcoin
voltlog.com/donations
→Support the channel by clicking these links (CommissionsEarned)
Aliexpress voltlog.com/y/kr0sa
Ebay voltlog.com/y/jzkfp
Amazon.com voltlog.com/y/qw4d3
Banggood.com voltlog.com/y/o4025
→Blog Post
voltlog.com
→Timeline
00:05 Introduction U6 Lite
02:50 Initial PoE Test
03:35 Disassembly
04:13 Top side PCB Overview
05:06 Back side PCB Overview
06:18 Some basic measurements
07:16 A Voltlog debug trick
09:00 Something is shorting!
10:20 Test after removing culprit
10:43 Validate result with PoE input
11:22 Replacing failed capacitor
11:32 Success & Comments
15:37 Conclusion
16:33 Interesting observation
#UniFi #U6-Lite #Repair
Can we save this Unifi U6 Lite from the landfill? In today's video, I take a look at a defective Ubiquiti Unifi U6 Lite access point I scored for around €27. The seller claimed they could no longer "control it," but upon arrival, the unit wouldn't even boot, pulling a mere 1.6W from the wall with no LED activity.
We’ll dive deep into the PoE circuitry, identifying the TPS2376 controller and the LM76003 buck regulator. I'll show you my process for "educated guessing" on voltage injection and how a thermal camera revealed an incredibly cheap and sneaky culprit: a shorted MLCC capacitor.
→Tools I used in this video
Guide IR E2+ Thermal Camera youtu.be/vXxPVfVMdvs
Sugon 8650 Hot Air Station youtu.be/JD3lpJCURqA
Genuine STIRRI flux from Eleshop voltlog.com/y/jregv
→Useful links
U6-Lite AP details techspecs.ui.com/unifi/wifi/u6-lite
LM76003 datasheet ti.com/lit/ds/symlink/lm76002.pdf
→Support the channel via Patreon, Paypal or Bitcoin
voltlog.com/donations
→Support the channel by clicking these links (CommissionsEarned)
Aliexpress voltlog.com/y/kr0sa
Ebay voltlog.com/y/jzkfp
Amazon.com voltlog.com/y/qw4d3
Banggood.com voltlog.com/y/o4025
→Blog Post
voltlog.com
→Timeline
00:05 Introduction U6 Lite
02:50 Initial PoE Test
03:35 Disassembly
04:13 Top side PCB Overview
05:06 Back side PCB Overview
06:18 Some basic measurements
07:16 A Voltlog debug trick
09:00 Something is shorting!
10:20 Test after removing culprit
10:43 Validate result with PoE input
11:22 Replacing failed capacitor
11:32 Success & Comments
15:37 Conclusion
16:33 Interesting observation
#UniFi #U6-Lite #Repair










