The most awesome VFD clock kit | Voltlog #388 @voltlog
The most awesome VFD clock kit | Voltlog #388  @voltlog
Uploaded November 2021 | Updated November 2026, 5 days ago
High quality PCB Services pcbway.com In this video I am assembling an awesome looking IV-18 VFD tube based clock kit. As expected the instructions are not entirely up to date, but I figured out the pinout of the IV-18 tube and got this kit completed.

→Order the VFD Clock here voltlog.com/y/lysnb
→VFD Clock Assembly Drawings voltlog.com/y/n7rgu
→VFD Clock User Manual voltlog.com/y/yixqr
→VFD Clock Assembly Instructions voltlog.com/y/6qvd4

→Support the channel by clicking these links (CommissionsEarned)
Aliexpress voltlog.com/y/kr0sa
Ebay voltlog.com/y/jzkfp
Amazon.com voltlog.com/y/qw4d3
Banggood.com voltlog.com/y/o4025

→Support the channel via Patreon, Paypal or Bitcoin
voltlog.com/donations

Welcome to a new Voltlog, in this video I will show you how I assembled this VFD tube based clock, I like the looks of this clock very much it’s kind of steampunk type of style and because this is a kit, it’s widely accessible to anyone, you don’t need very specific tools to get this assembled and I believe anyone can put one together. As a bonus this clock, although it doesn’t include one in the kit, it can support connecting a GPS receiver for syncing the clock and on top of that you get a remote control so you can control it from a distance which is pretty neat if you ask me.

So to start the assembly I am going to prepare the two boards, because even though it looks like one, these are actually 2 individual PCBs, you just need to separate them by snapping along the v-scored lines. This is a technique that’s used for efficiency during manufacturing, it’s called panelizing and they just stick 2 or more designs together on the same board but they are meant to be separated later on. Sometimes when you separate these boards, you are left with some sharp edges, if that’s the case you can use some sandpaper to clean the edges.

Next, if we take a look at the boards we notice all of the SMT components have already been assembled, all we have to do is assemble these through holes components, we have a mercury switch, an IR received, an LDR light dependent resistor, a temperature sensor, a buzzer and these two connectors. It doesn’t matter in which order you assemble these but some of them are polarized so it’s important to get the orientation right and to solder them correctly to ensure good electrical and mechanical connection without overheating them and without damaging surrounding components.


#VoltLog #VFD #Clock
The most awesome VFD clock kit | Voltlog #388I Found the Almost Perfect Thermal Camera - THOR 002 ReviewIntheMail | Voltlog #366InTheMail | Voltlog #444InTheMail | Voltlog #476Amtech NC-559 is GONE - This New STIRRI Flux is BETTEReMMC WFBGA153 Flash Memory To microSD Card Adapter - Voltlog #351The Mysterious Case of the Dying Coffee Scale (Eureka Precisa)Installing Frigate NVR On The Khadas VIM4 Ubuntu | Voltlog #429Mega Mailbag: Gadgets & Gear (Christmas Special!) | Voltlog #496revC Tasmota ESP32 Floor Heating Valve Controller | Voltlog 397InTheMail | Voltlog #519
VoltLog |

The most awesome VFD clock kit | Voltlog #388

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER