Dead pixel repair on RGB LED Matrix P1-4 @atc1441

Aaron Christophel | Dead pixel repair on RGB LED Matrix P1-4 @atc1441 | Uploaded September 2019 | Updated October 2024, 5 hours ago.
In this video i will show you how to repair a dead pixel on one of these RGB Matrix boards that are getting popular in the maker sceane right now.

They are named like this on shopping sides:

P2.5 RGB Matrix, the 2.5 is the space between the leds. so you can choose between different sizes.

Have fun.

Here is a good manual on how to drive these Matrix with an ESP8266/ESP32
youtube.com/watch?v=YvU_ZfF7vs4

Musik:
youtube.com/watch?v=7bD_r5u3znQ

Quick tip finding an unknown Debug interface pinout (SWD) shown on the MiBand with

Vegas.pl Black Horse gambling mashine internal linux

Dong DOOM The special pleasing experience

Programming the CH552 Chip directly via Android, CH55x Programmer Manual

Update on Modified Transistor tester how to on http://atcnetz.de

New Arduino Firmware for the P8 Smartwatch

Driving an 4.4 Black White Red E-Paper Pricetag with an ESP32 and Arduino

Arduino Data to Unity3D Puma 200 Robot Arm

DIY Wifi Arduino Alarmsystem using only 3 parts!

HowTo bypass APPROTECT of nRF52832 or nRF52840 with ESP32 Power glitching