Uploaded June 2026 | Updated November 2026, 10 hours ago
Custom fiberglass panels cover gaps, cutouts, and battery packs with durable parts that fit your build. In this episode, presented by Fibre Glast, the Electric Supercar team fabricates three custom fiberglass panels for an electrified 1992 Nissan 300ZX.
#CustomFiberglassPanels #FiberglassLayup #EVConversion
Watch the original episode on the Electric Supercar channel: youtube.com/watch?v=PpCAKHN2yws
WHAT YOU'LL SEE
• Rear wheel well guards that close the gap behind the tires, with a pass-through for the charging cable
• A rear battery cover: 3D scanned, modeled in CAD, 3D printed, then finished in fiberglass
• How to apply parting wax and PVA before a fiberglass layup
• Front engine bay covers laminated in place over suspension cutouts, with a barrier so the part doesn't bond to the car
• Trimming, marking fastener holes, and adding vertical faces to block water splash
WHO THIS IS FOR
DIY builders, EV converters, restorers, and fabricators who need a custom panel, cover, or filler where no off-the-shelf part exists. If you're new to hand layup, this is a full look at the process from form to finished part.
CHAPTERS
0:00 Three Custom Fiberglass Panels for an Electric 300ZX
0:49 3D-Printed Forms for the Rear Wheel Well Gap
1:42 Mixing Resin and Laying Up the Wheel Well Panels
3:29 Wheel Well Guards Finished, with Charging Cable Cutout
3:51 Rear Battery Cover: 3D Scan, CAD Model, and 3D Print
4:24 Applying Wax and PVA Release to the 3D Print
4:54 Fiberglass Layup on the Rear Battery Cover
5:38 Trimming the Battery Cover and Marking Fastener Holes
6:29 Front Engine Bay Covers for the Suspension Cutouts
7:08 Laying Up and Trimming the Front Covers
8:14 Adding Vertical Faces to Block Water Splash
9:26 Panels Installed: Next Up, Console and Gauge Surround
PRODUCTS USED IN THIS VIDEO
90 - Isophthalic Polyester Resin: fibreglast.com/products/isophthalic-polyester-resin-just-resin-90
MEKP Hardener: fibreglast.com/products/mekp-hardener-69
China Bristle Brushes: fibreglast.com/products/china-bristle-brushes-34
Parting Wax: fibreglast.com/products/parting-wax-1016
Learn more about working with fiberglass in the Fibre Glast Learning Center: fibreglast.com/pages/learning-center
Shop all composite supplies: fibreglast.com
Same day shipping when ordered by 2:30pm ET
Custom fiberglass panels cover gaps, cutouts, and battery packs with durable parts that fit your build. In this episode, presented by Fibre Glast, the Electric Supercar team fabricates three custom fiberglass panels for an electrified 1992 Nissan 300ZX.
#CustomFiberglassPanels #FiberglassLayup #EVConversion
Watch the original episode on the Electric Supercar channel: youtube.com/watch?v=PpCAKHN2yws
WHAT YOU'LL SEE
• Rear wheel well guards that close the gap behind the tires, with a pass-through for the charging cable
• A rear battery cover: 3D scanned, modeled in CAD, 3D printed, then finished in fiberglass
• How to apply parting wax and PVA before a fiberglass layup
• Front engine bay covers laminated in place over suspension cutouts, with a barrier so the part doesn't bond to the car
• Trimming, marking fastener holes, and adding vertical faces to block water splash
WHO THIS IS FOR
DIY builders, EV converters, restorers, and fabricators who need a custom panel, cover, or filler where no off-the-shelf part exists. If you're new to hand layup, this is a full look at the process from form to finished part.
CHAPTERS
0:00 Three Custom Fiberglass Panels for an Electric 300ZX
0:49 3D-Printed Forms for the Rear Wheel Well Gap
1:42 Mixing Resin and Laying Up the Wheel Well Panels
3:29 Wheel Well Guards Finished, with Charging Cable Cutout
3:51 Rear Battery Cover: 3D Scan, CAD Model, and 3D Print
4:24 Applying Wax and PVA Release to the 3D Print
4:54 Fiberglass Layup on the Rear Battery Cover
5:38 Trimming the Battery Cover and Marking Fastener Holes
6:29 Front Engine Bay Covers for the Suspension Cutouts
7:08 Laying Up and Trimming the Front Covers
8:14 Adding Vertical Faces to Block Water Splash
9:26 Panels Installed: Next Up, Console and Gauge Surround
PRODUCTS USED IN THIS VIDEO
90 - Isophthalic Polyester Resin: fibreglast.com/products/isophthalic-polyester-resin-just-resin-90
MEKP Hardener: fibreglast.com/products/mekp-hardener-69
China Bristle Brushes: fibreglast.com/products/china-bristle-brushes-34
Parting Wax: fibreglast.com/products/parting-wax-1016
Learn more about working with fiberglass in the Fibre Glast Learning Center: fibreglast.com/pages/learning-center
Shop all composite supplies: fibreglast.com
Same day shipping when ordered by 2:30pm ET










