Uploaded August 2014 | Updated September 2026, 1 week ago

---

This is the second video of a multiple part series focused around how to create an isolation style circuit board using a CNC router machine. This is experimentation video of different setups and techniques we have explored as our end goal is to produce the best circuit board possible using a CNC machine.

There are a few new challenges when creating a circuit board using a sharp cutting bit on a thin layer of copper as the tight tolerances required account for much of the special care that is need to make a good board.

In this lesson series (playlist) we will be creating a small circuit board starting with schematics to board design, etching, drilling, assembly and testing. Showing all the steps involved will hopefully help the beginner get starting making there own circuit boards.

The playlist for all the DIY circuit board videos using a CNC router can be found here youtube.com/watch?v=9nGtLVOpkVs&list=PLYqy2KdNTccOv9VPwZzx8_OBYeodGUjL6

The software used in this video tutorial...
Eagle PCB Software: cadsoftusa.com
PCB G-Code Software: pcbgcode.com
AutoLeveller: autoleveller.co.uk
Mach3 CNC Software: machsupport.com

*Twitter: twitter.com/GuruBrewShow
*Facebook: facebook.com/guru.brew

All Materials Found Here (c) The Guru Brew Tech Web Show
Visit us on the web at: GuruBrewShow.com

Have a question to ask the Brew? GuruBrewShow.com/?page_id=1478