Uploaded December 2023 | Updated November 2026, 2 days ago
This video was released around 2018, but was temporarily hidden from view due to rights issues.
I remembered those days and tried to upload it.
I would be happy if you could watch it.
I made remake of the $ 3 speaker.
I attached it to an enclosure made by hollowing out wood.
The type of enclosure is backload horn.
【Sound quality】
I could hear the bass while the sound path was as short as 80 cm.
Wood utilizes laminated rubber of rubber available at a relatively inexpensive price.
It is harder than the MDF board, so the sound sharped.
Although the enclosure manufactured with MDF was a feeling of being caught, the sound has become more vigorous by using rubber laminated wood.
【Design of enclosure】
Enclosure designed with spreading constant 1.2
The throat cross section is 10 cm ^ 2
The length of the conduit is about 80 cm.
The sound path is optimized to match the calculated value as much as possible.
【Production】
The enclosure we made this time can be produced with trimmer and saw blade (using band saw for animation), drilling.
The tree block is ordered on the net. I had you cut it to the specified size.
Google translation
Optional support (Thanks)
Please provide the following in the description of your upload:
Music: Country Blues - Silent Partner youtu.be/GXHtQsgwRrU
Please provide the following in the description of your upload:
Music: Jazz In Paris - Media Right Productions: youtu.be/mNLJMTRvyj8
andotowa.quu.cc
100均のスピーカーをバックロードホーンに改造しました。
木材をくりぬいて作製したエンクロージャーに装着。
エンクロージャーのタイプはバックロードホーンです。
【音質】
音道が80cmと短いながら低音が聞こえるようになりました。
木は比較的安価に手に入るゴムの集成材を利用。
MDFボードよりも硬質な木材のため、音がシャープになりました。
MDFで製作したエンクロージャーは「モコモコ」、「ゴソゴソ」した感じでしたがゴム集成材を使うことで音がのびやかになっています。
【エンクロージャーの設計】
エンクロージャーは広がり定数1.2で設計
スロート断面積は10cm^2
導管の長さは約80cm。
音道は出来るだけ計算値と一致するように最適化しています。
【製作について】
今回作ったエンクロージャはトリマーとノコギリ(動画ではバンドソーを利用)、ドリルがあれば製作できます。
音楽
Optional support (Thanks)
Please provide the following in the description of your upload:
Music: Country Blues - Silent Partner youtu.be/GXHtQsgwRrU
Please provide the following in the description of your upload:
Music: Jazz In Paris - Media Right Productions: youtu.be/mNLJMTRvyj8
andotowa.quu.cc
This video was released around 2018, but was temporarily hidden from view due to rights issues.
I remembered those days and tried to upload it.
I would be happy if you could watch it.
I made remake of the $ 3 speaker.
I attached it to an enclosure made by hollowing out wood.
The type of enclosure is backload horn.
【Sound quality】
I could hear the bass while the sound path was as short as 80 cm.
Wood utilizes laminated rubber of rubber available at a relatively inexpensive price.
It is harder than the MDF board, so the sound sharped.
Although the enclosure manufactured with MDF was a feeling of being caught, the sound has become more vigorous by using rubber laminated wood.
【Design of enclosure】
Enclosure designed with spreading constant 1.2
The throat cross section is 10 cm ^ 2
The length of the conduit is about 80 cm.
The sound path is optimized to match the calculated value as much as possible.
【Production】
The enclosure we made this time can be produced with trimmer and saw blade (using band saw for animation), drilling.
The tree block is ordered on the net. I had you cut it to the specified size.
Google translation
Optional support (Thanks)
Please provide the following in the description of your upload:
Music: Country Blues - Silent Partner youtu.be/GXHtQsgwRrU
Please provide the following in the description of your upload:
Music: Jazz In Paris - Media Right Productions: youtu.be/mNLJMTRvyj8
andotowa.quu.cc
100均のスピーカーをバックロードホーンに改造しました。
木材をくりぬいて作製したエンクロージャーに装着。
エンクロージャーのタイプはバックロードホーンです。
【音質】
音道が80cmと短いながら低音が聞こえるようになりました。
木は比較的安価に手に入るゴムの集成材を利用。
MDFボードよりも硬質な木材のため、音がシャープになりました。
MDFで製作したエンクロージャーは「モコモコ」、「ゴソゴソ」した感じでしたがゴム集成材を使うことで音がのびやかになっています。
【エンクロージャーの設計】
エンクロージャーは広がり定数1.2で設計
スロート断面積は10cm^2
導管の長さは約80cm。
音道は出来るだけ計算値と一致するように最適化しています。
【製作について】
今回作ったエンクロージャはトリマーとノコギリ(動画ではバンドソーを利用)、ドリルがあれば製作できます。
音楽
Optional support (Thanks)
Please provide the following in the description of your upload:
Music: Country Blues - Silent Partner youtu.be/GXHtQsgwRrU
Please provide the following in the description of your upload:
Music: Jazz In Paris - Media Right Productions: youtu.be/mNLJMTRvyj8
andotowa.quu.cc

![3in1 Multi Tool Track Guide / Circular Saw Guide
I have created a new cutting guide for three tools: circular saws, jigsaws and routers.
Click here for the plan
https://jisaku-koubou.com/downloads/multitrack-guide
[Plan List]
https://jsk-koubou.stores.jp/ 3in1 Multi Tool Track Guide / Circular Saw Guide](https://i.ytimg.com/vi/ql_W9ujuyIU/mqdefault.jpg)
![2in1 Using an Electric Hand Plane - Rig System Part.5
This is part 5 of the Electric plane rig system.
It is equipped with two functions: a simple Benchtop Jointer and a hand guide that can be chamfered at any angle.
The minimum angle can be chamfered to an acute angle of 15 °.
Since the circular saw table can only process from 45 ° to 90 °, it is the only method for chamfering at an acute angle.
Click here for the plan↓
https://jisaku-koubou.com/downloads/rig-system05
Part.1
https://youtu.be/zWH0k2iu4iA
Part.2
https://youtu.be/o2xkMRT4zqU
Part.3
https://youtu.be/3J4fX7OeXy0
Part.4
https://youtu.be/jeAh3pbfNLw
Part.5
https://youtu.be/qvns7WIsR4E
【Plan List】
https://jsk-koubou.stores.jp/
[JIG]
・Extendable Circle Cutting Router Jig
https://youtu.be/2mEV75w6_cQ
・Drill stand
https://youtu.be/n-neSE8mwDg
・Magnet drill stand
https://youtu.be/a2kIJDhhZrg
・Belt sander
https://youtu.be/KaojkUzeEJU
・Making a 2-in-1 Circular Saw Slide Guide (Easy Panel Saw)
https://youtu.be/M1xYKw5FP-0
・How to make Line laser module
https://youtu.be/a5QKe4fZszY
・Workbench
https://youtu.be/cpnR1txnPGM
・Homemade height gauge
https://youtu.be/qdd8Jtsbbcc
・right angle corner clamp
https://youtu.be/yGoMIY325NM 2in1 Using an Electric Hand Plane - Rig System Part.5](https://i.ytimg.com/vi/qvns7WIsR4E/mqdefault.jpg)
![Amazing DIY electric glue gun.
I made an electric silicone gun with adjustable output.
Click here for the plan
https://jisaku-koubou.com/downloads/e-siliconegun
[Plan List]
https://jsk-koubou.stores.jp/
【JIG】
・Extendable Circle Cutting Router Jig
https://youtu.be/2mEV75w6_cQ
・Drill stand
https://youtu.be/n-neSE8mwDg
・Magnet drill stand
https://youtu.be/a2kIJDhhZrg
・Belt sander
https://youtu.be/KaojkUzeEJU
・Making a 2-in-1 Circular Saw Slide Guide (Easy Panel Saw)
https://youtu.be/M1xYKw5FP-0
・How to make Line laser module
https://youtu.be/a5QKe4fZszY
・Workbench
https://youtu.be/cpnR1txnPGM
・Homemade height gauge
https://youtu.be/qdd8Jtsbbcc
・right angle corner clamp
https://youtu.be/yGoMIY325NM Amazing DIY electric glue gun.](https://i.ytimg.com/vi/r10Tr4BgeTA/mqdefault.jpg)
![Adjustable router jig for square holes or recesses
Hello friends
I made a simple router jig.
It can be adjusted according to what you want to fit.
It is also possible to process non-right angle shapes.
Jig plan convenient for woodworking
https://jisaku-koubou.com/downloads/router-template-jig
[Plan List]
https://jsk-koubou.stores.jp/
You must also watch this video to use this jig.
https://youtu.be/w5TPj_mh7Sc Adjustable router jig for square holes or recesses](https://i.ytimg.com/vi/rPGa5QBQHmQ/mqdefault.jpg)




![How to Build a Panel Saw - 3in1 Circular Saw Slide Guide
This video is an upgrade video of the 2in1 circular saw slide guide.
I was often asked in the comments if there was a panel-saw video.
At first glance, the 2in1 circular saw slide guide doesnt look like a panel saw, so I decided to edit the video and republish it.
↓ Making a 2-in-1 Circular Saw Slide Guide (Easy Panel Saw)
https://youtu.be/M1xYKw5FP-0
Download the plan from here.
https://jisaku-koubou.com/downloads/sawguide02
[Plan List]
https://jsk-koubou.stores.jp/
【JIG】
・Extendable Circle Cutting Router Jig
https://youtu.be/2mEV75w6_cQ
・Drill stand
https://youtu.be/n-neSE8mwDg
・Magnet drill stand
https://youtu.be/a2kIJDhhZrg
・Belt sander
https://youtu.be/KaojkUzeEJU
・Making a 2-in-1 Circular Saw Slide Guide (Easy Panel Saw)
https://youtu.be/M1xYKw5FP-0
・How to make Line laser module
https://youtu.be/a5QKe4fZszY
・Workbench
https://youtu.be/cpnR1txnPGM
・Homemade height gauge
https://youtu.be/qdd8Jtsbbcc
・right angle corner clamp
https://youtu.be/yGoMIY325NM How to Build a Panel Saw - 3in1 Circular Saw Slide Guide](https://i.ytimg.com/vi/sa2I0vUCXsE/mqdefault.jpg)
