Uploaded April 2023 | Updated September 2026, 3 weeks ago
The Creality Halot One Plus is a 4K resin 3D printer with a 5” colour touch screen, built in WiFi for remote print monitoring and a decent sized print volume.
Resin printers excel at printing incredibly detailed 3D models. Even tiny prints smaller than your thumb nail look very impressive - something almost impossible with filament based 3D printers.
If you’re new to this technology I’d highly recommend you take a look at my previous video that introduces resin 3D printing. There's a link down below. But in essence these printers use UV light to harden liquid resin into your 3D model, layer by layer and with almost invisible layer lines.
I’ll run through the printers’ features and through a selection of test prints I’ll help you decide if this might be the right printer for you.
If you want to skip forward or back at any time in this video, please use the chapter markers YouTube creates from the timestamps down below and in the pinned comment.
--------
Buy direct from Creality:
Creality Halot One Plus: shrsl.com/4ff8i
As an Amazon affiliate, I get a small commission from purchases made via any Amazon links.
Creality Halot One Plus: geni.us/0quuE2
Creality Wash and Cure Station UW-01: geni.us/3PxY526
Creality Water Washable Resin Plus (Skin): geni.us/r5Cd3B
IPA 5L: geni.us/xmowy
Silicon mats (2): geni.us/F3MZSCi
Funnel and filters: geni.us/8Hxja
Nitrile gloves: geni.us/hwFsvo (I've found these cheaper locally - in the UK: Toolstation). These are the ones I use for cycling repairs so are probably tougher than you really need.
Heavy duty wipes: geni.us/1ALgwoY
Soft paper towels: geni.us/0BN28rX
Written article: thetechnologyman.com
--------
Intro to 3D resin printing feat. Elegoo Mars 2 Pro: youtu.be/G6fi_9Ly8-4
Models featured in video:
Cones of Calibration: tableflipfoundry.com
Amerilabs Town: ameralabs.com/blog/town-calibration-part
Eiffel Tower: printables.com/model/572-eiffel-tower
Leaning Tower of Pisa: printables.com/model/261584-leaning-tower-of-pisa-italy
Sagrada Familia: myminifactory.com/object/3d-print-sagrada-familia-complete-barcelona-57814
Creality Halot One Plus build plate drainer: thingiverse.com/thing:5863579
Card wallet: printables.com/model/246961-cascade-card-wallet-print-in-place/files
--------
You can find most of the recent tech I've reviewed recently all in one place on my Amazon page. I also have a list some of my recommended tech and my current camera equipment for filming:
UK: amazon.co.uk/shop/thetechnologyman
US: amazon.com/shop/thetechnologyman
--------
Music in video from:
Epidemic Sound:
epidemicsound.com/referral/1piat9 (FREE 30 day trial with this link)
--------
Timestamps:
0:00 Intro
0:48 Overview: unboxing
1:48 Levelling build plate
2:02 Printer walkthrough: resin tank, dual Z-axis rails, active filter, screen, USB ports
2:38 WiFi setup for Creallity Cloud
3:13 Build quality, spec
4:02 Performance. Fill resin tank Creality Water Washable Resin Plus
4:25 Cones of Calibration test print to set exposure
6:02 Printer noise, carbon filter performance
6:27 Amerilabs Town miniature test print
6:41 Eiffel Tower, UW01 Washing & Curing Station
7:43 Drip attachment for resin printer
8:04 Leaning Tower of Pisa - initial failed print, cleaning up
8:54 Barcelona's Sagrada Familia
9:03 Printing directly from Creality Cloud: Minion
9:58 Creality Cloud app - monitoring and webcam live streaming
10:18 Print in place card wallet. Compared to filament printer
11:00 Conclusions
--------
#creality #3dprinting #halotoneplus
The Creality Halot One Plus is a 4K resin 3D printer with a 5” colour touch screen, built in WiFi for remote print monitoring and a decent sized print volume.
Resin printers excel at printing incredibly detailed 3D models. Even tiny prints smaller than your thumb nail look very impressive - something almost impossible with filament based 3D printers.
If you’re new to this technology I’d highly recommend you take a look at my previous video that introduces resin 3D printing. There's a link down below. But in essence these printers use UV light to harden liquid resin into your 3D model, layer by layer and with almost invisible layer lines.
I’ll run through the printers’ features and through a selection of test prints I’ll help you decide if this might be the right printer for you.
If you want to skip forward or back at any time in this video, please use the chapter markers YouTube creates from the timestamps down below and in the pinned comment.
--------
Buy direct from Creality:
Creality Halot One Plus: shrsl.com/4ff8i
As an Amazon affiliate, I get a small commission from purchases made via any Amazon links.
Creality Halot One Plus: geni.us/0quuE2
Creality Wash and Cure Station UW-01: geni.us/3PxY526
Creality Water Washable Resin Plus (Skin): geni.us/r5Cd3B
IPA 5L: geni.us/xmowy
Silicon mats (2): geni.us/F3MZSCi
Funnel and filters: geni.us/8Hxja
Nitrile gloves: geni.us/hwFsvo (I've found these cheaper locally - in the UK: Toolstation). These are the ones I use for cycling repairs so are probably tougher than you really need.
Heavy duty wipes: geni.us/1ALgwoY
Soft paper towels: geni.us/0BN28rX
Written article: thetechnologyman.com
--------
Intro to 3D resin printing feat. Elegoo Mars 2 Pro: youtu.be/G6fi_9Ly8-4
Models featured in video:
Cones of Calibration: tableflipfoundry.com
Amerilabs Town: ameralabs.com/blog/town-calibration-part
Eiffel Tower: printables.com/model/572-eiffel-tower
Leaning Tower of Pisa: printables.com/model/261584-leaning-tower-of-pisa-italy
Sagrada Familia: myminifactory.com/object/3d-print-sagrada-familia-complete-barcelona-57814
Creality Halot One Plus build plate drainer: thingiverse.com/thing:5863579
Card wallet: printables.com/model/246961-cascade-card-wallet-print-in-place/files
--------
You can find most of the recent tech I've reviewed recently all in one place on my Amazon page. I also have a list some of my recommended tech and my current camera equipment for filming:
UK: amazon.co.uk/shop/thetechnologyman
US: amazon.com/shop/thetechnologyman
--------
Music in video from:
Epidemic Sound:
epidemicsound.com/referral/1piat9 (FREE 30 day trial with this link)
--------
Timestamps:
0:00 Intro
0:48 Overview: unboxing
1:48 Levelling build plate
2:02 Printer walkthrough: resin tank, dual Z-axis rails, active filter, screen, USB ports
2:38 WiFi setup for Creallity Cloud
3:13 Build quality, spec
4:02 Performance. Fill resin tank Creality Water Washable Resin Plus
4:25 Cones of Calibration test print to set exposure
6:02 Printer noise, carbon filter performance
6:27 Amerilabs Town miniature test print
6:41 Eiffel Tower, UW01 Washing & Curing Station
7:43 Drip attachment for resin printer
8:04 Leaning Tower of Pisa - initial failed print, cleaning up
8:54 Barcelona's Sagrada Familia
9:03 Printing directly from Creality Cloud: Minion
9:58 Creality Cloud app - monitoring and webcam live streaming
10:18 Print in place card wallet. Compared to filament printer
11:00 Conclusions
--------
#creality #3dprinting #halotoneplus
