Uploaded December 2024 | Updated November 2026, 13 hours ago
It is an application of bevel gear differential.
Input: green and blue pinions.
Output: pink frame with pan and tilt movements.
The white small gear is just an idler and spins freely on the motor shaft. Doing that helps keep the big spur gears from being pushed out of line.
The video shows the following cases in turn:
1. If the green big gear rotates at speed V and the blue large gear rotates at speed V (in the same direction): the pink output bracket pans at speed V, no tilt motion.
2. If the green big gear is stationary and the blue large gear rotates at speed V: the pink output bracket tilts at speed V, no pan motion.
3. If the green big gear rotates at speed V and the blue large gear is stationary: the pink output bracket pans and tilts at speed V.
4. If the green big gear rotates at speed V and the blue large gear rotates at speed V (in opposite directions): the pink output bracket pans at speed V, tilts at speed 2V.
To get a new pan position of A deg. from 0 pan position: rotate two big spur gears A deg. in the same direction.
To get a new tilt position of B deg. from 0 tilt position: rotate the blue big spur gear B deg. while keeping the green big spur gear immobile.
This video was made based on video
youtu.be/Su6O6155UJM
STEP files of this video:
mediafire.com/file/9ua9mauo13ibxv1/Control2Rotations9STEP.zip/file
Inventor files of this video:
mediafire.com/file/azhc29qaahecf56/Control2Rotations9Inv.zip/file
It is an application of bevel gear differential.
Input: green and blue pinions.
Output: pink frame with pan and tilt movements.
The white small gear is just an idler and spins freely on the motor shaft. Doing that helps keep the big spur gears from being pushed out of line.
The video shows the following cases in turn:
1. If the green big gear rotates at speed V and the blue large gear rotates at speed V (in the same direction): the pink output bracket pans at speed V, no tilt motion.
2. If the green big gear is stationary and the blue large gear rotates at speed V: the pink output bracket tilts at speed V, no pan motion.
3. If the green big gear rotates at speed V and the blue large gear is stationary: the pink output bracket pans and tilts at speed V.
4. If the green big gear rotates at speed V and the blue large gear rotates at speed V (in opposite directions): the pink output bracket pans at speed V, tilts at speed 2V.
To get a new pan position of A deg. from 0 pan position: rotate two big spur gears A deg. in the same direction.
To get a new tilt position of B deg. from 0 tilt position: rotate the blue big spur gear B deg. while keeping the green big spur gear immobile.
This video was made based on video
youtu.be/Su6O6155UJM
STEP files of this video:
mediafire.com/file/9ua9mauo13ibxv1/Control2Rotations9STEP.zip/file
Inventor files of this video:
mediafire.com/file/azhc29qaahecf56/Control2Rotations9Inv.zip/file










