Uploaded February 2025 | Updated November 2026, 15 hours ago
Input is the blue crank-shaft.
The horizontal bar consists of two bars (green and yellow) connected together by a revolution joint and the black spring.
When the yellow bar contacts with the red screw, the oscillation center of the horizontal bar changes, thus the stroke length L of the blue output slider also changes.
So the L value can be varied by adjusting the red screw.
Special feature: the output slider has a variable stroke while keeping its highest position unchanged.
Note: L cannot be reduced to zero.
Input is the blue crank-shaft.
The horizontal bar consists of two bars (green and yellow) connected together by a revolution joint and the black spring.
When the yellow bar contacts with the red screw, the oscillation center of the horizontal bar changes, thus the stroke length L of the blue output slider also changes.
So the L value can be varied by adjusting the red screw.
Special feature: the output slider has a variable stroke while keeping its highest position unchanged.
Note: L cannot be reduced to zero.










