Constructing A Byzantine Sundial-Calendar - Part 4 (Depthing & Planting The Gear Train) @Clickspring
Constructing A Byzantine Sundial-Calendar - Part 4 (Depthing & Planting The Gear Train)  @Clickspring
Uploaded September 2024 | Updated November 2026, 9 hours ago
Hey Folks,

Designed and constructed in 2016-2019 as a companion project to the Antikythera mechanism, this video series is an alternative look at the second oldest geared mechanism from antiquity: The Byzantine (London) Sundial-Calendar.

I designed the project as a sort of 'gateway' project into more complex horological work, especially if you're already comfortable with model engineering, and maybe feel like tackling something a little unusual. I've seen some outstanding builds of this project over the intervening years and would love to see more. So, if you'd like to build along with the series and help me make these videos, the plans for the project are available as part of the $1 tier on Patreon, find out more here: patreon.com/clickspring/about

Those of you who are Patrons will notice that for this YouTube release of the series I've spruced up the intro card and soundtrack, and also combined a few episodes together to make it all a bit more efficient for the viewer. For those who are seeing this narrated build series for the first time, do please enjoy!

Cheers.
Chris.

Join YouTube Channel Memberships here: youtube.com/channel/UCworsKCR-Sx6R6-BnIjS2MA/join
Become a Clickspring Patron here: patreon.com/clickspring/membership
________________________________________________________

A very special thank you to Patrons:

Sinking Valley Woodworks
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Mike Manfrin
Steven Sladewski
Peter John Richardson
Sam Towne
Adam Slagle
Bernd Fischer
Rudolph Bescherer Jr
Robin Haerens
Mitchell Collins
Daniel Taraldsen
Jeremiah G. Mort
L'Enfant Watch Company
Rollin W. Patrick, Jr.
C. A. Patrick Voigt
Jack Cause
Daniel Taraldsen
Jeremiah G. Mort
Andrew Smith
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
John Maksim
RobinP556
Lea Bruder
Armagus
John S Dilsaver
matt mcparland
Daniel Cohen
Larry Pardi
Sean Kuyper
Samuel Irons
Dan Keen
Florian Ragwitz
Matthew Middleton
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Dave Seff
Tim Bray
________________________________________________________

References:

Original Artefact:
collection.sciencemuseumgroup.org.uk/objects/co1082/byzantine-sundial-calendar-sundial-perpetual-calendar

Michael T. Wright (curator): en.wikipedia.org/wiki/Michael_T._Wright_(curator).

J.V. Field & M.T. Wright, “Gears from the Byzantines: a Portable Sundial with Calendrical Gearing”, Annals of Science, 42 (1985), pp. 87 – 138.

D.R. Hill, “Al-Bīrūnī’s Mechanical Calendar”, Annals of Science, 42 (1985), pp.139 – 163.

J.V. Field, “Some Roman and Byzantine Portable Sundials and the London Sundial-Calendar”, History of Technology, 12 (1990), pp. 103 – 135.

M.T. Wright, “Rational and Irrational Reconstruction: the London Sundial-Calendar and the Early History of Geared Mechanisms”, History of Technology, 12 (1990), pp.65 – 102.


You can also help me make these videos by purchasing via the following Amazon Affiliate links:

Cameras:

Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT

Books:

"Solidworks 2013 Bible": amzn.to/2FObS1D
"Machinery's handbook": amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/4c0e5H0
"Hardening, Tempering & Heat Treatment", Tubal Cain: amzn.to/2IdTQLw

Tools & Shop Products:

Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/48Ofcac
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Spotting Drill Bit, M42 HSS: amzn.to/3XLq70m
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV

Consumables:

Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Dialux Metal Polishing Compound White and Grey 4oz 1/4b: amzn.to/3vopCPo
Blue Matador Abrasive Paper: amzn.to/3yLBhtL
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l
Tix Solder: amzn.to/2G4lUiE
Tix Flux 1/2oz: amzn.to/2G85OEZ
Constructing A Byzantine Sundial-Calendar - Part 4 (Depthing & Planting The Gear Train)The #Antikythera Mechanism Episode 11 - Inscribing The Back Plate - Part 2Clockmaking - How To Make A Clock In The Home Machine Shop - Part 2 - Machining The Clock PillarsClockmaking - How To Make A Clock - Part 14 - Making The Barrel Click And ClickspringRhodes ~100 BC #antikytheramechanismHome Machine Shop Tool Making - Machining A Pinion Head Depthing Tool - Part 3Home Machine Shop Tool Making - Machining A Finger Plate Clamping Tool - Part 2Spare Parts #1 - Making, Hardening And Tempering A Keyway Cutter For The LatheWatchmaking - Making a Watchmakers Faceplate for the Sherline Lathe - Part 1Home Machine Shop Tool Making - Machining A Finger Plate Clamping Tool - Part 1The Process of Enameling Guilloche - Introducing The Rose Engine - Happy Anniversary Mrs ClickspringPatron Series 3: Constructing a #ArtDeco Dial Indicator Part 3 (Making The Bridge & Main Plate)
Clickspring |

Constructing A Byzantine Sundial-Calendar - Part 4 (Depthing & Planting The Gear Train)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER