CNC Routing Process (CAD, CAM and CNCl) Variant 2: Part 4 Cut Out the Shelves. @PatrickHoodDaniel
CNC Routing Process (CAD, CAM and CNCl) Variant 2: Part 4 Cut Out the Shelves.  @PatrickHoodDaniel
Uploaded June 2020 | Updated November 2026, 1 hour ago
I applied the machining operations in CAMBAM. However, I did not do it correctly as you will see right after I make the first cut. In this video, you will see me cut out all of the shelves/levels of the vertical parts holder. All of the levels are cleaned up.

I upload to Instagram very frequently and add great informative content as well as customer test videos. Make sure to follow me on Instagram at:
instagram.com/buildyourcnc_newbiehack

CAMBAM Software:
buildyourcnc.com/item/CAM-SOFTWARE-cambam

I use this CAM software for my purposes. I personally like the simple user interface and I am able to understand the parameters from years of experience, so I don't need CAM software that explains what the parameters mean.

Mach3 CNC Control Software:
buildyourcnc.com/item/control-SOFTWARE-mach3

This is the software I use with my CNC router.

The greenBullv2 60 degree 4'x8' CNC Router:
buildyourcnc.com/item/cnc-machine-greenbullv2-milling-laser

This is CNC router that I use in my shop and is my favorite as it can also house a laser gantry and it is a great space saver. It takes up the same amount of space as a typical 4'x8' machine, but it is intended to be pushed up against a wall so only one side of the machine needs to be accessed.

All of these machines and software can be purchased at BuildYourCNC.com
buildyourcnc.com
CNC Routing Process (CAD, CAM and CNCl) Variant 2: Part 4 Cut Out the Shelves.VLOG 3 - Making the Dust Shoe for the Fabricator Pro34. How to Calibrate the ADC (Analog to Digital Converter) - STM32 ARM Microcontroller - Part 1Program the ARM Microcontroller Using ChatGPT: Trial1 #newbiehack #stm32  #chatgptLaser Cut Test: 1/2 Plexiglass, 2 Focal Lens, 80 Watt CO2 Laser, Various speeds, Nozzle on surfaceHow to wire Stepper Motors to Motor Drivers for Laser ControllersHow to use 20mm Hiwin linear rail blocksUnderstanding I2C Communication with OLED Display: STM32 Microcontroller Programming Deep Dive19. How to Interface an LCD to an ARM Microcontroller - Part 6How to Communicate using SPI with the STM32 ARM MCU and a 400g Accelerometer - GPT-4o vs Claude26. How to Interface an LCD to an ARM Microcontroller Tutorial - Part 13Introduction to the NewbieHack Patreon Effort
BuildYourCNC |

CNC Routing Process (CAD, CAM and CNCl) Variant 2: Part 4 Cut Out the Shelves.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER