26. How to Interface an LCD to an ARM Microcontroller Tutorial - Part 13 @PatrickHoodDaniel
26. How to Interface an LCD to an ARM Microcontroller Tutorial - Part 13  @PatrickHoodDaniel
Uploaded June 2017 | Updated November 2026, 1 day ago
Purchase my new book: Arm Microcontroller Programming and Circuit Building Volume 1
amazon.com/dp-B09PHBT859/dp/B09PHBT859

I recommend using the STM32CubeIDE:
st.com/en/development-tools/stm32cubeide.html

You can still download the CoIDE here:
sourceforge.net/projects/coide



Please watch: "Buildyourcnc CNC Router on Love Yurts"
youtube.com/watch?v=90KkIO-67Qk --~--
Patrick's Tip Jar:
bitcoin:1Gtawd29Sgu5CdvfUnkRg1YBfowCawjFdH
Ether:0xa962365100011B79097A7bb9DD51A53eE98266bb
If you have found this video to be helpful, consider making a tip. Thanks.
The LCD is added to the ARM STM32 Microcontroller Circuit. Prior to that, I test the function of the enable signal by lighting up the LED connected to the enable output pin.

Using a very slow process (so we humans can see what is going on), I show how the LCD enable pin is firing when it needs to fire.


● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

You can find the Character Displays on Amazon at the following links (all with the HD44780 controller necessary to use with the tutorial):
16x2 LCD: amzn.to/2rbQmvX
20x4 LCD: amzn.to/2t0ocFw

These display are also available at newbiehack.com

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●



Please consider contributing subtitles in your language to this video:
youtube.com/timedtext_cs_queue

Visit the Newbiehack.com website where you can find the Arduino ARM microcontroller:
newbiehack.com

Purchase the tools necessary to complete these tutorials:
newbiehack.com/Categories/ARM

Equipment that I use to make videos:
Canon EOS Rebel: amzn.to/2rJSeh0
Macro Lens: amzn.to/2qaSKmK
Microphone: amzn.to/2qO2RB4
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): amzn.to/2ruFnSn
The drafting pencil I use on these videos: amzn.to/2qioYg2
The cheap oscilloscope that I use (because it's cheap and will work all of the projects in these tutorials): amzn.to/2rSHnBa
A better oscilloscope and the one I would recommend: amzn.to/2qizK5M
The brand of multimeter that I use and the one I recommend: amzn.to/2qicUez


Want to have your own Patreon campaign? patreon.com/invite/wpllxz

The way I teach is to understand the fundamentals of production, not Arduino style one-off projects. I urge all Arduino fans that want to develop projects that will be offered to consumers to be production oriented and use the Arduino bare chip to learn how to develop rather than using the Sketch environment and the Arduino boards that contain many passive components that need to be removed during the production development phases.
26. How to Interface an LCD to an ARM Microcontroller Tutorial - Part 13Introduction to the NewbieHack Patreon EffortLearn STM32 Microcontroller Programming - Full Course for EE/CS Students and Beginners Version 32. Install Mach3 and the pokeys57CNC Plug-in for Mach353. How to Remove LCD Artifacts after a Changing Number - ARM STM32 Microcontroller Tutorial56. Remove the LCD to simplify the Circuit and Setup STM Studio - ARM Microcontroller Tutorials55. How to Make Multiple Pin External Interrupts (2 pins) - ARM STM32 Microcontroller TutorialOLED Display Programming Command Registers STM32 (Contrast, Segment Remapping, and Inverse)#9 ARM STM32 Microcontroller Tutorial - Solder SMD Chips Like a BOSS!!How to use our Vacuum Pressure ControllerCreating an STM32 64 Pin Breakout Board in KiCad  - Live Design Session - Part 143. How to Use or Create a PWM (Pulse Width Modulation) Signal Part 1 - STM32 ARM Microcontroller
BuildYourCNC |

26. How to Interface an LCD to an ARM Microcontroller Tutorial - Part 13

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER