Uploaded November 2022 | Updated September 2026, 4 days ago
HAVE you SEEN this whole series?
Link to the PLAYLIST so you can watch ALL of the videos on The Salvage Cave Rebuild:
youtube.com/playlist?list=PLYawuZlnembvRQCUv513QT3d2EyZpDXb6
In order to maximize the space available at The Salvage Cave, I decided to use the outside area behind the building. The goal was to make room for some of the bigger machines that won't fit into the building. The back area was covered in trees, and there were some areas that constantly made the ground like a swamp from an underground drain. These were just a couple of the things that made the outside unusable. Join me as I work on creating more space for all of my projects on Salvage Workshop.
I didn't have the opportunity to use the shop for Salvage Workshop until MANY months later, so if you have been enjoying this content, have no fear, this series will continue later when I show you some of the additional upgrades and repairs I have had to complete on the building since I started using it! For now though, the Salvage Cave is ready to be used!
I hope you enjoy the video, and I look forward to hearing from you in the comments!
As ALWAYS, Thanks for Watching!
~
This building used to be a car repair shop. The extra space and room has been nice, but before I could use this shop as another workshop for the channel, a LOT of work needed to be done, including a new roof, better lighting, and much more! I have restored a variety of old tools and machines on the channel; now, it's time to restore an old shop. I spent the winter on this construction project, and I hope you'll enjoy following along. Join me on another adventure as I take an old, beat up shop and transform it into The Salvage Cave.
~
0:00 - Starting the chainsaw
0:20 - Beginning the tree work and cutting down trees
4:23 - There is a robin outside the shop door
5:36 - A dangerous situation
6:06 - Bringing out the GEHL
8:04 - Sharpening the chain on the STIHL chainsaw
8:38 - Putting more fuel into the chainsaw
12:15 - Firing the chainsaw back up
12:30 - Maybe not...
12:50 - Clogged filter
13:50 - Firing the chainsaw back up... again
14:10 - Cutting down more trees
14:28 - Cutting up the trunk of the tree into logs
15:00 - Cutting up more trees
20:20 - The back of the Cave
23:54 - Fire
26:00 - Starting up the wheel loader to clear out the logs
27:46 - Cutting up the trunk to load up the logs
34:00 - My buddy driving the GEHL
40:48 - Back to the wheel loader
43:00 - Loading up the truck
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
Follow my Instagram for what else I'm up to!
★Instagram★ instagram.com/salvageworkshop
#ShopRestoration #TheSalvageCave #SalvageWorkshopOnSite
HAVE you SEEN this whole series?
Link to the PLAYLIST so you can watch ALL of the videos on The Salvage Cave Rebuild:
youtube.com/playlist?list=PLYawuZlnembvRQCUv513QT3d2EyZpDXb6
In order to maximize the space available at The Salvage Cave, I decided to use the outside area behind the building. The goal was to make room for some of the bigger machines that won't fit into the building. The back area was covered in trees, and there were some areas that constantly made the ground like a swamp from an underground drain. These were just a couple of the things that made the outside unusable. Join me as I work on creating more space for all of my projects on Salvage Workshop.
I didn't have the opportunity to use the shop for Salvage Workshop until MANY months later, so if you have been enjoying this content, have no fear, this series will continue later when I show you some of the additional upgrades and repairs I have had to complete on the building since I started using it! For now though, the Salvage Cave is ready to be used!
I hope you enjoy the video, and I look forward to hearing from you in the comments!
As ALWAYS, Thanks for Watching!
~
This building used to be a car repair shop. The extra space and room has been nice, but before I could use this shop as another workshop for the channel, a LOT of work needed to be done, including a new roof, better lighting, and much more! I have restored a variety of old tools and machines on the channel; now, it's time to restore an old shop. I spent the winter on this construction project, and I hope you'll enjoy following along. Join me on another adventure as I take an old, beat up shop and transform it into The Salvage Cave.
~
0:00 - Starting the chainsaw
0:20 - Beginning the tree work and cutting down trees
4:23 - There is a robin outside the shop door
5:36 - A dangerous situation
6:06 - Bringing out the GEHL
8:04 - Sharpening the chain on the STIHL chainsaw
8:38 - Putting more fuel into the chainsaw
12:15 - Firing the chainsaw back up
12:30 - Maybe not...
12:50 - Clogged filter
13:50 - Firing the chainsaw back up... again
14:10 - Cutting down more trees
14:28 - Cutting up the trunk of the tree into logs
15:00 - Cutting up more trees
20:20 - The back of the Cave
23:54 - Fire
26:00 - Starting up the wheel loader to clear out the logs
27:46 - Cutting up the trunk to load up the logs
34:00 - My buddy driving the GEHL
40:48 - Back to the wheel loader
43:00 - Loading up the truck
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
Follow my Instagram for what else I'm up to!
★Instagram★ instagram.com/salvageworkshop
#ShopRestoration #TheSalvageCave #SalvageWorkshopOnSite
