Uploaded February 2026 | Updated September 2026, 5 hours ago

---

The Z position is fairly lenient, but the X position is precise.

1. Get facing angle 16384 (You can do this by entering near the middle of the door then turning around 2 - 4 times)
2. Roll towards the gate with the angle
3. Line up link's right foot with the white circular part of the gate (https://i.imgur.com/u7i8QjW.png)
4. Turn around and backflip into the gate
5. Neutral roll forwards, *(wait until Link stops)*
6. Pull put Boomerang with target (or pull out normally)
7. Hold forward and C-Up cancel the Boomerang
8. Turn 180 *(wait until Link stops)*
9. Pull out Clawshot with target (or pull out normally)
10. Hold forward and C-Up cancel Clawshot
11. Target slash once *(wait until Link stops)*
12. Turn 180
13. Hold up and A at the same time and do a roll stab
14. Shortly after getting through, Jumpslash (I use an audio cue for this, right after the rollstab sound ends)

Things I've noticed with this setup:
- It seems to only work if X position is 17341.8477
- Z Positions -12690 to -12668 work