Uploaded April 2019 | Updated November 2026, 10 hours ago
Ken's YouTube Channel - youtube.com/treebangham
Randahl's Twitch Channel - twitch.tv/randahl1
My friend Ken visited Suffolk last year and gave me a piece of chestnut, a wood I had never used. There was just enough to make a box so make a box I did! I used a piece of leatherwork to inlay into the lid from my friend Randahl on Twitch. This was a fairly simple box build but it exercises a lot of different woodworking skills.
I've made other wood boxes in the past on my YouTube channel, using joints like dovetails, rebates, mitres and even just butt joints with dowels. I think a box with rebated corners is a nice alternative to a mitred corner box as it shows very little of the end grain. You can even shape a curve to the box like I have here so no unsightly end grain shows at all.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US
Ken's YouTube Channel - youtube.com/treebangham
Randahl's Twitch Channel - twitch.tv/randahl1
My friend Ken visited Suffolk last year and gave me a piece of chestnut, a wood I had never used. There was just enough to make a box so make a box I did! I used a piece of leatherwork to inlay into the lid from my friend Randahl on Twitch. This was a fairly simple box build but it exercises a lot of different woodworking skills.
I've made other wood boxes in the past on my YouTube channel, using joints like dovetails, rebates, mitres and even just butt joints with dowels. I think a box with rebated corners is a nice alternative to a mitred corner box as it shows very little of the end grain. You can even shape a curve to the box like I have here so no unsightly end grain shows at all.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US






![Poor Mans Roubo Style Frame Saw Using a Bandsaw Blade [Woodworking Tool]
First of all Id like to mention the video that inspired my video, a bandsaw blade frame saw by Mike Sander - https://www.youtube.com/watch?v=0O5tbt-RzBU
This is my twist on a Roubo Style Frame Saw, I think its fair to call it the poor mans style of frame saw because the total cost was around £45-50. You could make it for cheaper as well if you wish but I went for a mid range bandsaw blade rather than a cheap one. The joints are drawbore mortise and tenon with walnut (I think if I remember rightly) dowels and the frame itself is made from oak.
I dont think the way I fastened the blade was the best way but it was what came to my mind at the time. Im open to suggestions on what youd do differently and how youd improve upon the design. This build was completed entirely with hand tools.
Thank you for viewing and hopefully Ill catch you soon!
Please check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Poor Mans Roubo Style Frame Saw Using a Bandsaw Blade [Woodworking Tool]](https://i.ytimg.com/vi/mIa846twvCo/mqdefault.jpg)



