Uploaded April 2021 | Updated September 2026, 3 weeks ago
Why are some FPV controllers $40 while others are $250? What makes some radios better than others and, as a beginner, which features should you actually care about? Here's my take on FPV Controllers 101... and my top recommendations!
BetaFPV Lite Radio 2 SE - tiny.cc/zyzvtz
Radiomaster TX12 - tiny.cc/0zzvtz
Radiomaster TX16S - tiny.cc/1zzvtz
Radiomaster TX16S (with Crossfire Module) - tiny.cc/3zzvtz
TBS Tango 2 - tinyurl.com/ybz5yzzp
Here’s all the gear I currently use:
(links unavailable as of April 11, 2023. Will be back in a few days!)
All of the above are affiliate links! They will not cost you anything extra but will give me a small commission when used!
Want to support my work and get exclusive benefits? Check me out on Patreon!
patreon.com/mattpochwat
For business inquiries, feel free to contact me at:
mattpochwat@gmail.com
You can also check me out on Instagram!
instagram.com/matt_pochwat
0:00 Intro
1:55 Form Factor
3:36 Gimbals
4:43 Switches
5:31 Channels
6:54 Receiver Protocols
9:41 Frequencies
11:15 Module Bay
12:43 Simulator Support
13:04 Software
13:42 Telemetry Support
14:22 Output Power
14:49 Other Features
15:26 Configuration
16:09 Some radio recommendations
Why are some FPV controllers $40 while others are $250? What makes some radios better than others and, as a beginner, which features should you actually care about? Here's my take on FPV Controllers 101... and my top recommendations!
BetaFPV Lite Radio 2 SE - tiny.cc/zyzvtz
Radiomaster TX12 - tiny.cc/0zzvtz
Radiomaster TX16S - tiny.cc/1zzvtz
Radiomaster TX16S (with Crossfire Module) - tiny.cc/3zzvtz
TBS Tango 2 - tinyurl.com/ybz5yzzp
Here’s all the gear I currently use:
(links unavailable as of April 11, 2023. Will be back in a few days!)
All of the above are affiliate links! They will not cost you anything extra but will give me a small commission when used!
Want to support my work and get exclusive benefits? Check me out on Patreon!
patreon.com/mattpochwat
For business inquiries, feel free to contact me at:
mattpochwat@gmail.com
You can also check me out on Instagram!
instagram.com/matt_pochwat
0:00 Intro
1:55 Form Factor
3:36 Gimbals
4:43 Switches
5:31 Channels
6:54 Receiver Protocols
9:41 Frequencies
11:15 Module Bay
12:43 Simulator Support
13:04 Software
13:42 Telemetry Support
14:22 Output Power
14:49 Other Features
15:26 Configuration
16:09 Some radio recommendations




![Do THIS to Make Your 1S Batteries Last Longer #shorts
1S Lipo Cable: http://tiny.cc/oudmuz
(You will need an xt30 to xt60 adapter for most chargers)
xt30 to xt60 adapter: http://tiny.cc/sudmuz
To charge your batteries using this method:
1. Connect 4 batteries to the cable. These should be all the same type and have the same capacity (mah).
Note: If you have a cable that can connect 4 batteries, you must connect 4 batteries at a time. Do not connect 3, or 2, or 1.
2. Plug the other ends (xt60 and balance lead) of the cable into the charger.
3. In your chargers settings, if your 1S batteries are HV batteries, select HV/High Voltage as the battery type. Otherwise, MAKE SURE the battery type is set to LiPo.
4. Next, the cell count should be set to 4S if you are plugging in 4 batteries. If your cable is for 6 batteries, you would choose 6S.
5. Finally, for the current setting, you want to set that to the amp hour rating of your battery. (This is the mAh number on your battery divided by 1000)
6. If your battery says, 300mah, you will select 0.3A on your charger. If your batteries say 250mah, you will select 0.2A or 0.3A.
7. Then tell your charger to charge your batteries or store your batteries, depending on what you are trying to do.
Disclaimer: When you do this, you are charging the batteries in series. This is NOT the same as parallel charging. When youre charging bigger batteries with a parallel charging board, there are additional safety precautions you have to take. Check out this video for more info on that: [https://www.youtube.com/watch?v=IJiqTWvymCA]
#creatornow Do THIS to Make Your 1S Batteries Last Longer #shorts](https://i.ytimg.com/vi/Yz4QKoqd_As/mqdefault.jpg)





