Uploaded November 2020 | Updated September 2026, 3 weeks ago
Currently, DJI is probably the most polarizing company in the FPV world right now. Most people know them for their really popular range of consumer-grade camera drones, but a bit over a year ago they decided to make their grand entrance into the FPV market as well. In the past few months, there have been a few rumours going around that new things are coming from DJI... could it be an actual FPV drone?
Currently, DJI is probably the most polarizing company in the FPV world right now. Most people know them for their really popular range of consumer-grade camera drones, but a bit over a year ago they decided to make their grand entrance into the FPV market as well. In the past few months, there have been a few rumours going around that new things are coming from DJI... could it be an actual FPV drone?
![Do THIS to Make Your 1S Batteries Last Longer #shorts
1S Lipo Cable: http://tiny.cc/oudmuz
(You will need an xt30 to xt60 adapter for most chargers)
xt30 to xt60 adapter: http://tiny.cc/sudmuz
To charge your batteries using this method:
1. Connect 4 batteries to the cable. These should be all the same type and have the same capacity (mah).
Note: If you have a cable that can connect 4 batteries, you must connect 4 batteries at a time. Do not connect 3, or 2, or 1.
2. Plug the other ends (xt60 and balance lead) of the cable into the charger.
3. In your chargers settings, if your 1S batteries are HV batteries, select HV/High Voltage as the battery type. Otherwise, MAKE SURE the battery type is set to LiPo.
4. Next, the cell count should be set to 4S if you are plugging in 4 batteries. If your cable is for 6 batteries, you would choose 6S.
5. Finally, for the current setting, you want to set that to the amp hour rating of your battery. (This is the mAh number on your battery divided by 1000)
6. If your battery says, 300mah, you will select 0.3A on your charger. If your batteries say 250mah, you will select 0.2A or 0.3A.
7. Then tell your charger to charge your batteries or store your batteries, depending on what you are trying to do.
Disclaimer: When you do this, you are charging the batteries in series. This is NOT the same as parallel charging. When youre charging bigger batteries with a parallel charging board, there are additional safety precautions you have to take. Check out this video for more info on that: [https://www.youtube.com/watch?v=IJiqTWvymCA]
#creatornow Do THIS to Make Your 1S Batteries Last Longer #shorts](https://i.ytimg.com/vi/Yz4QKoqd_As/mqdefault.jpg)









