Uploaded October 2017 | Updated November 2026, 3 hours ago
This DIY Charred Mirror is quite an easy project to try. It can easily be completed over a weekend including allowing the glue and varnish to dry.The joints are held together using glue and dowels. I used a jigsaw to cut out the shape of the mirror frame and used a router with a rebate bit to remove the material for the mirror to sit. I used the router again this time with a rounder over bit to round all the facing edges of the frame. I charred the wood with a blow torch, I torched the wood to how I personally like it but you could do it less or more depending on you're taste. I applied three coats of varnish to the wood with a light sanding before the last coat. I used some clear silicone sealant to attach the mirror to the frame. The shape of the mirror is based on one which i once seen while visiting the UK a few years back.
**Always be careful using tools and machinery**
Music: YouTube audio library.
This DIY Charred Mirror is quite an easy project to try. It can easily be completed over a weekend including allowing the glue and varnish to dry.The joints are held together using glue and dowels. I used a jigsaw to cut out the shape of the mirror frame and used a router with a rebate bit to remove the material for the mirror to sit. I used the router again this time with a rounder over bit to round all the facing edges of the frame. I charred the wood with a blow torch, I torched the wood to how I personally like it but you could do it less or more depending on you're taste. I applied three coats of varnish to the wood with a light sanding before the last coat. I used some clear silicone sealant to attach the mirror to the frame. The shape of the mirror is based on one which i once seen while visiting the UK a few years back.
**Always be careful using tools and machinery**
Music: YouTube audio library.









