Uploaded February 2025 | Updated September 2026, 1 week ago

---

This video will show you how to change PROFINET telegrams in TIA Portal and see them showing as Active in the CMMT drive within Festo Automation Suite.

0:00 – Introduction
0:15 – Festo Automation Suite – Add Drive to Project
0:40 – Festo Automation Suite – First Setup Commissioning
1:15 – Festo Automation Suite – Verify Initial PROFINET Telegram 1 Settings Offline and Online
1:48 – TIA Portal – Add Drive to PLC Project
2:07 – TIA Portal – Verify Initial PROFINET Telegram 1 Settings Offline and Online
2:31 – Verify that Telegram 1 from PLC is also configured on the Drive in FAS
2:52 – TIA Portal – Change Telegram 1 to Telegram 111 only on the PLC
3:24 – Festo Automation Suite – Verify the PLC Configured Telegram 111 is pushed down to the Drive