Uploaded January 2021 | Updated September 2026, 2 weeks ago
This is a light that I made from a UV sterilizing wand and a dead CFL bulb. I had to modify the base to fit the wand but eventually got it to work. What I did was connect the pair of wires inside on each end of the curly tube and then twist each pair of those together with either wire coming from the driver board, polarity does not matter. I loaded up the inside of the CFL base with hot glue and glued the twisted wires down so they don't short because this Is high voltage.
the light output is pretty bright but about 2/3 as bright as a CFL in a regular socket. I haven't compared it to my other CFL light mod which seems dimmer. Well I hope y'all like this video and thanks for watching and please leave a like and comment.
This is a light that I made from a UV sterilizing wand and a dead CFL bulb. I had to modify the base to fit the wand but eventually got it to work. What I did was connect the pair of wires inside on each end of the curly tube and then twist each pair of those together with either wire coming from the driver board, polarity does not matter. I loaded up the inside of the CFL base with hot glue and glued the twisted wires down so they don't short because this Is high voltage.
the light output is pretty bright but about 2/3 as bright as a CFL in a regular socket. I haven't compared it to my other CFL light mod which seems dimmer. Well I hope y'all like this video and thanks for watching and please leave a like and comment.
