Uploaded October 2026 | Updated November 2026, 1 day ago
Sep 30, 2026
Amtrak California Gold Runner Train on the BNSF Stockton Sub passes through the Walnut Avenue railroad crossing in Winton, California.
This crossing here is an ATSF install but I'm not sure either the mid 90s or the mid 80s as there are no Hawker Siddley lights here which would easily point to late 80s to early 90s so these signals were installed either before or after that time frame. If the light heads weren't replacements themselves that are currently here but that's unlikely. Of course then later the crossing would receive LEDs and GS E-Bells and then those GS E-Bells would get replaced with the current ones here today. Also, the mechanisms were replaced with Siemens here.
Amtrak Gold Runner
CDTX 2107
CDTX 9304
CDTX 8309
- AMTK Train #701
Crossing Info
City: Winton, California
Crossing Signal/Line Owner: BNSF Railway
Railroad User(s): BNSF, AMTK
Bell Sequence: Ring through whole activation
Filmed Side: Eastern Side
Right Signal
Bell: GS Type 3 E-Bell
Lights: 4 pairs of 12x20 inch Dialights Ball LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: WCH
Install: ATSF early to mid 1990s, Installed between 1993 - 1995
Left Signal
Bell: GS Type 3 E-Bell
Lights: 4 pairs of 12x20 inch Dialights Ball LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: WCH
Install: ATSF early to mid 1990s, Installed between 1993 - 1995
This crossing owned by the Burlington Northern Santa Fe Railway is an ATSF early to mid 1990s signal install with changes to its bells, lights, gate lights, mechanisms, and counterweight arms over the years.
Camera
Sony FX30 Cinema Line + Tamron 17mm - 300mm
Sep 30, 2026
Amtrak California Gold Runner Train on the BNSF Stockton Sub passes through the Walnut Avenue railroad crossing in Winton, California.
This crossing here is an ATSF install but I'm not sure either the mid 90s or the mid 80s as there are no Hawker Siddley lights here which would easily point to late 80s to early 90s so these signals were installed either before or after that time frame. If the light heads weren't replacements themselves that are currently here but that's unlikely. Of course then later the crossing would receive LEDs and GS E-Bells and then those GS E-Bells would get replaced with the current ones here today. Also, the mechanisms were replaced with Siemens here.
Amtrak Gold Runner
CDTX 2107
CDTX 9304
CDTX 8309
- AMTK Train #701
Crossing Info
City: Winton, California
Crossing Signal/Line Owner: BNSF Railway
Railroad User(s): BNSF, AMTK
Bell Sequence: Ring through whole activation
Filmed Side: Eastern Side
Right Signal
Bell: GS Type 3 E-Bell
Lights: 4 pairs of 12x20 inch Dialights Ball LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: WCH
Install: ATSF early to mid 1990s, Installed between 1993 - 1995
Left Signal
Bell: GS Type 3 E-Bell
Lights: 4 pairs of 12x20 inch Dialights Ball LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: WCH
Install: ATSF early to mid 1990s, Installed between 1993 - 1995
This crossing owned by the Burlington Northern Santa Fe Railway is an ATSF early to mid 1990s signal install with changes to its bells, lights, gate lights, mechanisms, and counterweight arms over the years.
Camera
Sony FX30 Cinema Line + Tamron 17mm - 300mm








