Uploaded October 2026 | Updated November 2026, 1 day ago
Oct 2, 2026
The traffic signal and blank out sequence for the Sproule Avenue, North 12th Street, Sunbeam Avenue, and Ahern Street intersections with the railroad crossings for the SACRT Blue Line light rail trains near the Dos Rios Station in Sacramento, California with the new track and signal layout next to the brand new station. As you see, North 12th Street traffic stops for inbound trains as the inbound track leaves its ROW into traffic Street running while the outbound track remains in its own lane so it doesn't cause a N 12th St red light but this is the same sequence as the old track layout setup before the station.
IMHO, I wish SACRT would have gone for a crossing signal gate style for the Sproule Ave section because the tracks are in its own ROW there and the current setup is one SACRT replaced down at both Royal Oaks Dr and at Oxford St with the light rail being in its own ROW beside the roadway and running through a crossing and still relying on street running signal setup and circuits. As you can see, when an inbound train waits too long at the Dos Rios Station, the signals all time out automatically and hand back over the green light to N 12th St which also allows cars to turn left onto Sproule Ave in front of the train. The train operators and car drivers really need to pay attention to the signaling and be aware of their surroundings here because you can easily turn in front of a train in this section. Same reasons Royal Oaks Dr and Oxford St both were upgraded to crossing signals. Also, Royal Oaks Dr and Oxford St with this same setup was coming into a more modern era so upgrading to gates happened there. Here it was built in the modern era so I don't think SACRT has on their mind to even install gates at Sproule Ave but I read that if this becomes an accident or near miss prone area with trains, they'll have to install crossing gates as the CPUC would require them after enough data. SACRT has never planned to put gate here but I believe because it was a cost cutting feature to use this setup as SACRT always only has enough funding for only the project being worked on and never gets additional funding like other light rail systems so they usually either design a project to be cheaper or they would cut some things out a project to make it cheaper. It's the same reason the light rail can't get to the airport because that is a massing project and SACRT can't get the appropriate funding and can't cheapen it without cancelling it and just making a BRT even maybe to that. I read also that Royal Oaks Dr and Oxford St were built with traffic signals originally because in 1987 when the light rail starter line system was being built, SACRT also was having funding problems which led to those crossings not having signals and just traffic signals. Also because Oxford St couldn't get the proper prediction equipment due to its setup to predict the crossing circuits at least till the early 2000s. My second opinion is that I wish the just closed off Ahern St from crossing the tracks because it's a very low usage Rd and it's main traffic flow is from 12th St and the to 12th St lane is actually not a lane at the same time and would have been better to close this off. Infact, the roadway still has barricades up on Ahern St meaning they didn't feel comfortable opening it by the time this was all completed.
Old Alignment Setup
youtu.be/EOQ8gaH_jHI
SACRT 234
SACRT 209
- North Blue Line Inbound
- CAF SRTD LRV's
SACRT 222
SACRT 212
- South Blue Line Outbound
- CAF SRTD LRV's
SACRT 203
SACRT 218
- North Blue Line Inbound
- CAF SRTD LRV's
SACRT 228
SACRT 204
- North Blue Line Outbound
- CAF SRTD LRV's
SACRT 223
SACRT 238
- North Blue Line Inbound
- CAF SRTD LRV's
SACRT 221
SACRT 211
- North Blue Line Outbound
- CAF SRTD LRV's
Timestamp
0:00 Sproule Ave Side
3:54 North 12th St/Sunbeam Ave Intersection Side
6:51 Ahern St Side
Camera
DJI Osmo Pocket 4p (4 Pro) + Wide Lens
Oct 2, 2026
The traffic signal and blank out sequence for the Sproule Avenue, North 12th Street, Sunbeam Avenue, and Ahern Street intersections with the railroad crossings for the SACRT Blue Line light rail trains near the Dos Rios Station in Sacramento, California with the new track and signal layout next to the brand new station. As you see, North 12th Street traffic stops for inbound trains as the inbound track leaves its ROW into traffic Street running while the outbound track remains in its own lane so it doesn't cause a N 12th St red light but this is the same sequence as the old track layout setup before the station.
IMHO, I wish SACRT would have gone for a crossing signal gate style for the Sproule Ave section because the tracks are in its own ROW there and the current setup is one SACRT replaced down at both Royal Oaks Dr and at Oxford St with the light rail being in its own ROW beside the roadway and running through a crossing and still relying on street running signal setup and circuits. As you can see, when an inbound train waits too long at the Dos Rios Station, the signals all time out automatically and hand back over the green light to N 12th St which also allows cars to turn left onto Sproule Ave in front of the train. The train operators and car drivers really need to pay attention to the signaling and be aware of their surroundings here because you can easily turn in front of a train in this section. Same reasons Royal Oaks Dr and Oxford St both were upgraded to crossing signals. Also, Royal Oaks Dr and Oxford St with this same setup was coming into a more modern era so upgrading to gates happened there. Here it was built in the modern era so I don't think SACRT has on their mind to even install gates at Sproule Ave but I read that if this becomes an accident or near miss prone area with trains, they'll have to install crossing gates as the CPUC would require them after enough data. SACRT has never planned to put gate here but I believe because it was a cost cutting feature to use this setup as SACRT always only has enough funding for only the project being worked on and never gets additional funding like other light rail systems so they usually either design a project to be cheaper or they would cut some things out a project to make it cheaper. It's the same reason the light rail can't get to the airport because that is a massing project and SACRT can't get the appropriate funding and can't cheapen it without cancelling it and just making a BRT even maybe to that. I read also that Royal Oaks Dr and Oxford St were built with traffic signals originally because in 1987 when the light rail starter line system was being built, SACRT also was having funding problems which led to those crossings not having signals and just traffic signals. Also because Oxford St couldn't get the proper prediction equipment due to its setup to predict the crossing circuits at least till the early 2000s. My second opinion is that I wish the just closed off Ahern St from crossing the tracks because it's a very low usage Rd and it's main traffic flow is from 12th St and the to 12th St lane is actually not a lane at the same time and would have been better to close this off. Infact, the roadway still has barricades up on Ahern St meaning they didn't feel comfortable opening it by the time this was all completed.
Old Alignment Setup
youtu.be/EOQ8gaH_jHI
SACRT 234
SACRT 209
- North Blue Line Inbound
- CAF SRTD LRV's
SACRT 222
SACRT 212
- South Blue Line Outbound
- CAF SRTD LRV's
SACRT 203
SACRT 218
- North Blue Line Inbound
- CAF SRTD LRV's
SACRT 228
SACRT 204
- North Blue Line Outbound
- CAF SRTD LRV's
SACRT 223
SACRT 238
- North Blue Line Inbound
- CAF SRTD LRV's
SACRT 221
SACRT 211
- North Blue Line Outbound
- CAF SRTD LRV's
Timestamp
0:00 Sproule Ave Side
3:54 North 12th St/Sunbeam Ave Intersection Side
6:51 Ahern St Side
Camera
DJI Osmo Pocket 4p (4 Pro) + Wide Lens

