Uploaded October 2025 | Updated September 2026, 2 weeks ago
When the comments started coming in saying that the P2S produces worse vibrations than the X1 or P1 printers, I knew I needed to investigate.
Help support this channel! patreon.com/Needitmakeit
A short list to help support this channel, thank you so much for your help!
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Bambu Super Tack - tidd.ly/47c81cF
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
If you're wondering. The thumbnail is actually real, at least it started that way, I removed the background from both my P2S and my X1C and then I asked Copilot to cover my X1C with moss and lichen, and it did an excellent job. It takes a while to tweak things to get them to look right, but I think it's pretty cool and I had a lot of control doing it.
I was pretty impressed with the amount of upgrades the P2S had and overall pretty happy with the final product, I would have liked to see the finer tooth spacing to help with VFAs and I would have liked to see the continued use of the CF rods, but I know some people are opposed to them because of the find carbon dust which could pose a long-term problem (not likely, but possible I suppose) but even after seeing it with my own eyes in my review video, it didn't occur to me that the P2S would produce more vibrations than the X1 and P1 printers. After thinking about it a bit and watching the printer in action, it seemed that it could be possible, and that's mainly because of the used of steel rods. Steel is heavier, but also tends to transfer vibration more easily. Carbon fiber, like the stuff used in bikes, tends to deden it instead. So in this video, we're going to do some APPLES to APPLES comparisons to see which printer produces better results, the OLD, or the New.
#bambu
#x1carbon
#H2D
When the comments started coming in saying that the P2S produces worse vibrations than the X1 or P1 printers, I knew I needed to investigate.
Help support this channel! patreon.com/Needitmakeit
A short list to help support this channel, thank you so much for your help!
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Bambu Super Tack - tidd.ly/47c81cF
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
If you're wondering. The thumbnail is actually real, at least it started that way, I removed the background from both my P2S and my X1C and then I asked Copilot to cover my X1C with moss and lichen, and it did an excellent job. It takes a while to tweak things to get them to look right, but I think it's pretty cool and I had a lot of control doing it.
I was pretty impressed with the amount of upgrades the P2S had and overall pretty happy with the final product, I would have liked to see the finer tooth spacing to help with VFAs and I would have liked to see the continued use of the CF rods, but I know some people are opposed to them because of the find carbon dust which could pose a long-term problem (not likely, but possible I suppose) but even after seeing it with my own eyes in my review video, it didn't occur to me that the P2S would produce more vibrations than the X1 and P1 printers. After thinking about it a bit and watching the printer in action, it seemed that it could be possible, and that's mainly because of the used of steel rods. Steel is heavier, but also tends to transfer vibration more easily. Carbon fiber, like the stuff used in bikes, tends to deden it instead. So in this video, we're going to do some APPLES to APPLES comparisons to see which printer produces better results, the OLD, or the New.
#bambu
#x1carbon
#H2D
