Uploaded November 2026 | Updated November 2026, 3 hours ago
Welcome back to Maketech! In this tutorial, we’re showing you how to laser engrave an art canvas by removing a layer of painted black coating.
In this video, we walk through the entire process—from prepping an 18x24 art canvas with white primer and flat black paint, to setting up your software (using Alien Cell Space software and the Alien Cell 40W X1). You'll also learn key tips like using a negative/inverted image, recommended engraving settings (Jarvis mode, power, speed, and line intervals), cleaning up soot, and applying a UV-resistant matte spray to protect your final masterpiece!
🛠️ Project Materials & Settings
- Canvas Size: 18" x 24" standard art canvas
- Prep: White primer + couple of coats of flat black paint (let dry for 24 hours)
- Laser Machine: Alien Cell 40W X1
- Software: Alien Cell Space
Image Mode: Inverted / Negative (Jarvis dithering mode)
Power: 48
Speed: 400
Line Interval: 0.08
Scan Mode: Bidirectional
Air Assist:20
- Finishing: Clean with a damp microfiber cloth (warm water + a drop of soap) and seal with UV-resistant matte spray.
*** Read my blog post on the Laser Engraving Canvas Art: maketechcreate.com/blogs/news/how-to-laser-engrave-an-art-canvas-step-by-step-tutorial
See my review of the Aliencell X1 Laser Engraver here: youtu.be/DJVvNUtVEp8
Video Chapters
0:00 - Introduction & Overview of Canvas Laser Engraving
0:27 - Canvas Prep: Primer and Flat Black Paint
0:50 - Software Setup, Machine Settings & Image Inversion
2:10 - Post-Processing: Cleaning Soot & Applying UV-Resistant Matte Spray
2:37 - Outro & Final Results
---
👍 If you enjoyed this tutorial, please give this video a thumbs up!
💬 **Have questions about this project?** Drop them in the comments below, and we’ll answer them as soon as possible.
🔔 **Make sure to subscribe to the channel** so you don't miss our next laser engraving project!
#LaserEngraving #Maketech #LaserTutorial #DIYArt #Laserengravedcanvas
Welcome back to Maketech! In this tutorial, we’re showing you how to laser engrave an art canvas by removing a layer of painted black coating.
In this video, we walk through the entire process—from prepping an 18x24 art canvas with white primer and flat black paint, to setting up your software (using Alien Cell Space software and the Alien Cell 40W X1). You'll also learn key tips like using a negative/inverted image, recommended engraving settings (Jarvis mode, power, speed, and line intervals), cleaning up soot, and applying a UV-resistant matte spray to protect your final masterpiece!
🛠️ Project Materials & Settings
- Canvas Size: 18" x 24" standard art canvas
- Prep: White primer + couple of coats of flat black paint (let dry for 24 hours)
- Laser Machine: Alien Cell 40W X1
- Software: Alien Cell Space
Image Mode: Inverted / Negative (Jarvis dithering mode)
Power: 48
Speed: 400
Line Interval: 0.08
Scan Mode: Bidirectional
Air Assist:20
- Finishing: Clean with a damp microfiber cloth (warm water + a drop of soap) and seal with UV-resistant matte spray.
*** Read my blog post on the Laser Engraving Canvas Art: maketechcreate.com/blogs/news/how-to-laser-engrave-an-art-canvas-step-by-step-tutorial
See my review of the Aliencell X1 Laser Engraver here: youtu.be/DJVvNUtVEp8
Video Chapters
0:00 - Introduction & Overview of Canvas Laser Engraving
0:27 - Canvas Prep: Primer and Flat Black Paint
0:50 - Software Setup, Machine Settings & Image Inversion
2:10 - Post-Processing: Cleaning Soot & Applying UV-Resistant Matte Spray
2:37 - Outro & Final Results
---
👍 If you enjoyed this tutorial, please give this video a thumbs up!
💬 **Have questions about this project?** Drop them in the comments below, and we’ll answer them as soon as possible.
🔔 **Make sure to subscribe to the channel** so you don't miss our next laser engraving project!
#LaserEngraving #Maketech #LaserTutorial #DIYArt #Laserengravedcanvas










