Byte Frost .23 firmware @60fps uploaded at 1440p @techdaemn
Byte Frost .23 firmware @60fps uploaded at 1440p  @techdaemn
Uploaded November 2019 | Updated September 2026, 6 hours ago
Please watch at 1440p even if on a 1080p monitor. All detail is lost otherwise.
First flights on Byte Frost firmware .23 with camera and GS at 60fps.
Performance is ok, but not great.
VTX at 450mW setting. Two AXII 2 omni antennas and two Triple Feed Patches on the ground station (using the Transformer box, so I turn to face the aircraft as well).

Here's analog comparison of the same flight route.
youtube.com/watch?v=M9amYQjxmUg

And here's what it looks like it uploaded direclty at 720p
youtube.com/watch?v=D2WOebyJEeI
which is unfortunately how most people are doing it.
Youtube only gives about 3Mbit/s peak bitrate to 720 vids,
while 1080p gets around 6Mbit/s and 1440p gets close to 20Mbit/s peak, and VP9 (H.265) codec so it's about twice as efficient, and has more than enough bitrate to cover the original.
The DVR records at about 16Mbit/s.
Byte Frost .23 firmware @60fps uploaded at 1440pJust cruisingUncut - Cliff diving a mile outWilliams Fork Fire smoke sunset timelapse from Jones PassBlackbox overlay on new QAV-XS.   Tuning/filtering problems.Test flight at 12k ft, 35-45mph wind  iFlight CineLR SH 7  EMAX ECO II 2807 1500kv motorsPartial solar eclipse and massive sunspots - Oct 23/2014
techdaemon |

Byte Frost .23 firmware @60fps uploaded at 1440p

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER