Uploaded October 2020 | Updated September 2026, 8 hours ago
In the process of building a new bigger, better, stronger, faster... furnace I needed to modify the burner to fit in the furnace. I decided to model the burner mount after the one I see on the Devil Forge furnaces.
Measured drawing of burner
drive.google.com/file/d/15rfjplYE4Svqrl_mptALixMj0H2d9IrX/view?usp=sharing
Visit me on Instagram at instagram.com/realswdweeb
My models are now available on my online store at plmfoundries.com/shop
I get asked about the moisture content of my sand. I have settled on a ratio of about 2 liters of sand and 36-42ish ml of water for my ratio. I start with sand that is dry.
#notapoliticalad #notcovidrelated
In the process of building a new bigger, better, stronger, faster... furnace I needed to modify the burner to fit in the furnace. I decided to model the burner mount after the one I see on the Devil Forge furnaces.
Measured drawing of burner
drive.google.com/file/d/15rfjplYE4Svqrl_mptALixMj0H2d9IrX/view?usp=sharing
Visit me on Instagram at instagram.com/realswdweeb
My models are now available on my online store at plmfoundries.com/shop
I get asked about the moisture content of my sand. I have settled on a ratio of about 2 liters of sand and 36-42ish ml of water for my ratio. I start with sand that is dry.
#notapoliticalad #notcovidrelated
