Tech Dregs | Building the Perfect Hunting Rifle Part 1: The Barrel @TechDregs | Uploaded 6 months ago | Updated 3 hours ago
Inspecting a new custom barrel from Patriot Valley Arms (PVA). This used an Osprey button rifle blank, 1 in 8 twist, chambered in 7mm PRC. I had it finished at 20 inches long, threaded 5/8-24 at the muzzle, prefit for a Terminus Kratos Lite, fluted, and Cerakoted graphite. Weight was 50.6oz or 1435g.
Part 2: youtu.be/74fjSAFn5CU
Part 3: youtu.be/CFQGaE-G-Eg
Part 4: youtu.be/RMX98nGuNxk
=== Timestamps ===
0:00 Introduction
1:00 Outer inspection
1:37 Weight/Cost
3:10 Pre-cleaning bore inspection
4:50 Post-cleaning bore inspection
7:00 Gauge and ammo check
8:38 Conclusion
Inspecting a new custom barrel from Patriot Valley Arms (PVA). This used an Osprey button rifle blank, 1 in 8 twist, chambered in 7mm PRC. I had it finished at 20 inches long, threaded 5/8-24 at the muzzle, prefit for a Terminus Kratos Lite, fluted, and Cerakoted graphite. Weight was 50.6oz or 1435g.
Part 2: youtu.be/74fjSAFn5CU
Part 3: youtu.be/CFQGaE-G-Eg
Part 4: youtu.be/RMX98nGuNxk
=== Timestamps ===
0:00 Introduction
1:00 Outer inspection
1:37 Weight/Cost
3:10 Pre-cleaning bore inspection
4:50 Post-cleaning bore inspection
7:00 Gauge and ammo check
8:38 Conclusion