Tech Dregs | Inside the Ascaso Dream PID @TechDregs | Uploaded 1 year ago | Updated 1 hour ago
A brief look at the guts of the Ascaso Dream PID espresso machine. I try to point out the water path, and give you some key part numbers, just in case you ever need to do some repairs.
I was having some issues building pressure, and my current theory is that it was just a loose connector inside. But it was a good excuse to have a poke around/do a teardown, anyway.
=== Timeline ===
00:00 Introduction
01:00 Getting the lid off
01:47 The culprit (I think?)
02:21 Electronics and the main board (STM32F0)
03:16 Water path
04:34 Sensors and thermoblock
06:53 ODE Solenoid
07:34 ARS Pump
07:56 Digimesa Flow Meter
08:48 Testing the "fix" for my issue
11:18 Conclusion
A brief look at the guts of the Ascaso Dream PID espresso machine. I try to point out the water path, and give you some key part numbers, just in case you ever need to do some repairs.
I was having some issues building pressure, and my current theory is that it was just a loose connector inside. But it was a good excuse to have a poke around/do a teardown, anyway.
=== Timeline ===
00:00 Introduction
01:00 Getting the lid off
01:47 The culprit (I think?)
02:21 Electronics and the main board (STM32F0)
03:16 Water path
04:34 Sensors and thermoblock
06:53 ODE Solenoid
07:34 ARS Pump
07:56 Digimesa Flow Meter
08:48 Testing the "fix" for my issue
11:18 Conclusion