Uploaded June 2024 | Updated September 2026, 2 weeks ago

---

This is the first installment for a new PiDP-11 playlist. In this video I open my PiDP-11 Kit, then verify and review all the components. In the next installment I will be per-installing the Raspberry Pi I've allocated to this project with the required software. The following installment will show the soldering of all the electronic components onto the units large PCB board, including the optional RS-232 controllers/drivers. Thanks for watching

Video Time Codes for this Video (click to skip directly to a desired section of the Video)
0:00 Introductions to my PiDP-11/70 Kit
3:13 Opening my PiDP-11 Package
13:43 Conclusion of my PiDP-11/70 Kit Description

Note: I have NOT received any sponsorship or commission for using the products shown in this video.
As an Amazon Associate I earn from qualifying purchases, when these links are used:

Raspberry Pi 4, Single Board Computer, 8GB RAM
amzn.to/4b6RNS8

Raspberry Pi Official Power Supply 15.3W USB-C with 1.5M Cable - US Plug 5.1V 3A, Black
amzn.to/45tXZT0

CanaKit 3.5A Raspberry Pi 4 Power Supply (USB-C)
amzn.to/3RyJ44d

INLAND Micro Center 128GB Class 10 MicroSDXC Flash Memory Card with Adapter for Mobile Device Storage Phone (5 Pack)
amzn.to/3VN8DBk

2PCS MAX232ACPE DIP-16 MAX232 Driver Receiver Chip Driver IC Chip
amzn.to/3z6SSMw

Eowpower 150Pcs 2.54mm Pitch DIP IC Sockets Adaptor Assortment Kit 6,8,14,16,18,24,28,40 Pin
amzn.to/4eoQKjt

#PiDP-11 #PiDP-11/70-Kit #PE4Doers