Building my own Ultrasonic Cleaner @BranchusCreations
Building my own Ultrasonic Cleaner  @BranchusCreations
Uploaded April 2022 | Updated November 2026, 3 days ago
UPDATE: Check out my very latest ultrasonic cleaner build here:
youtu.be/aDO3lxP4PO0

In this video I go into details about what an ultrasonic cleaner is, what it's used for and how it works. I will also go though the steps I took to build my own ultrasonic cleaner.

00:00 Intro
00:29 How does an ultrasonic cleaner work?
03:18 Different types of ultrasonic cleaners
06:23 Using an ultrasonic cleaner
11:36 Building my own ultrasonic cleaner
18:10 Building the case
19:01 First practical test
19:10 How to test if an ultrasonic cleaner is working
20:22 Problems and more problems
25:07 Summary

First follow up video:
youtu.be/33RiXyUFNj4

Second follow up video:
youtu.be/ByhGEFwCxoY

Ultrasonic Cleaner DIY | HOW IT WORKS by Hamster Time:
youtu.be/_RWleDI764w

Testing a homemade Ultrasonic carb cleaner by Jimmie Nichols
youtu.be/6cSdL7I4AHM

Mac84 YouTube channel
youtube.com/c/Mac84

#UltrasonicCleaner #Hobby #DIY

———— CHANNEL SUPPORT ————

Patreon: patreon.com/branchuscreations
Donations: paypal.me/branchus

Some links below are affiliate links. If you purchase through them, I may earn a small commission at no additional cost to you. Some manufacturers also provide discount codes for Branchus Creations viewers. As an Amazon Associate I earn from qualifying purchases.

T-SHIRTS
I buy all of my wacky t-shirts from Qwertee.
Discount code: BranchusCreations to get £1/€1/$1 off your order: bit.ly/3OrJZkT

———— TOOLS & EQUIPMENT ————

SOLDERING STATION (6% off with code BRANCHUS6):
FNIRSI DWS-200: fnirsi.com/products/dws-200?sca_ref=8660324.n0rV2W4rWG

HOT AIR STATION:
Quick 861DW: amzn.to/4y46sZL

SOLDER:
Kester 63/37 0.5mm diameter: amzn.to/4y6gaLf

FLUX (10% off with code BRANCHUS):
StirriASM-TF: stirri.com/products/stirri-asm-tf

SOLDER WICK (BRAID):
Goot Wick 2mm: amzn.to/4zmWkMP

MULTIMETER (15% off storewide with code BC15):
Kaiweets HT118E: tinyurl.com/msw2tunz

MULTIMETER/OSCILLOSCOPE (6% off with code BRANCHUS6):
FNIRSI 2C53T: fnirsi.com/products/2c53t?sca_ref=8660324.n0rV2W4rWG

TWEEZERS:
Hakko CHP 3-SA: amzn.to/2NqkhPz

ULTRASONIC CLEANERS:
Vevor ultrasonic cleaner range (5% off storewide with code VVMH5%OFF)
I use the 10L cleaner for smaller PCBs and the 30L cleaner for the larger ones.
AU site: https://s.vevor.com/bfP7q7
US site: https://s.vevor.com/bfP7uN
EU site: https://s.vevor.com/bfQaMb

FUME EXTRACTOR:
Vevor fume extractor range (5% off storewide with code VVMH5%OFF)
I use the Vevor 195 CFM, 150W fume extractor. Budget alternatives available.
US site: https://s.vevor.com/bfQ2CJ
EU site: https://s.vevor.com/bfQ2CR
AU site: https://s.vevor.com/bfQ1Cy
CA site: https://s.vevor.com/bfQ2C5

C245 Soldering cartridges: amzn.to/4yIzlvU
C245-C2 Soldering cartridge tip (most used): amzn.to/47PjTSB
Microscope: amzn.to/2HnSI5H
Microscope camera: Custom-modified Logitech c920 webcam with AmScope FMA050 adapter
Budget alternative microscope: amzn.to/2PmRagt
Budget alternative hot air rework: tinyurl.com/2pnxvrwd
28 AWG enamelled magnet wire (thick): amzn.to/4dvPkou
34 AWG enamelled magnet wire (med): amzn.to/4dNFkHt
40 AWG enamelled magnet wire (thin): amzn.to/4AXoVtG
Helping hands (third hand): amzn.to/4yH7D2B
Extra long T15 Torx driver: amzn.to/4yNx8iK
UV Solder mask: amzn.to/4yHCaNR
Swann Morton curved scalpel blades: amzn.to/2oN7qNn
No. 3 Scalpel Handle: amzn.to/2ngcx85
Kapton heat resistant tape: amzn.to/4ziYTzn
Building my own Ultrasonic CleanerQuick test of the v4 of Ecamm Live streaming softwareCreality Ender-3 v2 Bed Levelling ProblemsFNIRSI 2C53T - 3 in 1 - Multimeter, Oscilloscope & Signal Generator ReviewRestoring and video editing with a Macintosh Quadra 840AVYet another Mac Classic recappingBuilding a new Macintosh SE/30 Reloaded [LIVE]Trying to save a battery damaged Macintosh IIfx [LIVE]Recapping a Macintosh LC Power Supply [LIVE]Repairing a battery-bombed Macintosh SE/30, Part 6Recapping a Macintosh Quadra 840AV - Part 2 [LIVE]Building a brand new Macintosh Classic
Branchus Creations |

Building my own Ultrasonic Cleaner

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER