Creality Ender-3 v2 Bed Levelling Problems @BranchusCreations
Creality Ender-3 v2 Bed Levelling Problems  @BranchusCreations
Uploaded July 2023 | Updated November 2026, 3 days ago
Do you have an Ender-3 v2 that keeps going out of level (tram)? One moment it works beautifully and the next your first layer looks like garbage? You might have a faulty Z axis limit switch.

Here's how I fixed mine.

Replacement (right angle) switch from Digikey:
digikey.com/en/products/detail/c-k/ZMCJF7L0R/948310

For Australian viewers, here's is the switch I used from Jaycar:
https://www.jaycar.com.au/spdt-125v-3a-sub-miniature-micro-switch-with-lever/p/SM1036

You can buy the whole limit switch assembly from places like AliExpress, but I can't vouch for the quality of the switches they use. They might be just as faulty as the original:
aliexpress.com/item/1005004043504283.html

#creality #ender3v2 #3dprinting

———— CHANNEL SUPPORT ————

Patreon: patreon.com/branchuscreations
Donations: paypal.me/branchus

Some links below are affiliate links. If you purchase through them, I may earn a small commission at no additional cost to you. Some manufacturers also provide discount codes for Branchus Creations viewers. As an Amazon Associate I earn from qualifying purchases.

T-SHIRTS
I buy all of my wacky t-shirts from Qwertee.
Discount code: BranchusCreations to get £1/€1/$1 off your order: bit.ly/3OrJZkT

———— TOOLS & EQUIPMENT ————

SOLDERING STATION (6% off with code BRANCHUS6):
FNIRSI DWS-200: fnirsi.com/products/dws-200?sca_ref=8660324.n0rV2W4rWG

HOT AIR STATION:
Quick 861DW: amzn.to/4y46sZL

SOLDER:
Kester 63/37 0.5mm diameter: amzn.to/4y6gaLf

FLUX (10% off with code BRANCHUS):
StirriASM-TF: stirri.com/products/stirri-asm-tf

SOLDER WICK (BRAID):
Goot Wick 2mm: amzn.to/4zmWkMP

MULTIMETER (15% off storewide with code BC15):
Kaiweets HT118E: tinyurl.com/msw2tunz

MULTIMETER/OSCILLOSCOPE (6% off with code BRANCHUS6):
FNIRSI 2C53T: fnirsi.com/products/2c53t?sca_ref=8660324.n0rV2W4rWG

TWEEZERS:
Hakko CHP 3-SA: amzn.to/2NqkhPz

ULTRASONIC CLEANERS:
Vevor ultrasonic cleaner range (5% off storewide with code VVMH5%OFF)
I use the 10L cleaner for smaller PCBs and the 30L cleaner for the larger ones.
AU site: https://s.vevor.com/bfP7q7
US site: https://s.vevor.com/bfP7uN
EU site: https://s.vevor.com/bfQaMb

FUME EXTRACTOR:
Vevor fume extractor range (5% off storewide with code VVMH5%OFF)
I use the Vevor 195 CFM, 150W fume extractor. Budget alternatives available.
US site: https://s.vevor.com/bfQ2CJ
EU site: https://s.vevor.com/bfQ2CR
AU site: https://s.vevor.com/bfQ1Cy
CA site: https://s.vevor.com/bfQ2C5

C245 Soldering cartridges: amzn.to/4yIzlvU
C245-C2 Soldering cartridge tip (most used): amzn.to/47PjTSB
Microscope: amzn.to/2HnSI5H
Microscope camera: Custom-modified Logitech c920 webcam with AmScope FMA050 adapter
Budget alternative microscope: amzn.to/2PmRagt
Budget alternative hot air rework: tinyurl.com/2pnxvrwd
28 AWG enamelled magnet wire (thick): amzn.to/4dvPkou
34 AWG enamelled magnet wire (med): amzn.to/4dNFkHt
40 AWG enamelled magnet wire (thin): amzn.to/4AXoVtG
Helping hands (third hand): amzn.to/4yH7D2B
Extra long T15 Torx driver: amzn.to/4yNx8iK
UV Solder mask: amzn.to/4yHCaNR
Swann Morton curved scalpel blades: amzn.to/2oN7qNn
No. 3 Scalpel Handle: amzn.to/2ngcx85
Kapton heat resistant tape: amzn.to/4ziYTzn
Creality Ender-3 v2 Bed Levelling ProblemsFNIRSI 2C53T - 3 in 1 - Multimeter, Oscilloscope & Signal Generator ReviewRestoring and video editing with a Macintosh Quadra 840AVYet another Mac Classic recappingBuilding a new Macintosh SE/30 Reloaded [LIVE]Trying to save a battery damaged Macintosh IIfx [LIVE]Recapping a Macintosh LC Power Supply [LIVE]Repairing a battery-bombed Macintosh SE/30, Part 6Recapping a Macintosh Quadra 840AV - Part 2 [LIVE]Building a brand new Macintosh ClassicGreat Budget Thermal Camera for Your Toolkit? KTI-W01 Review!Adding the finishing touches to a Macintosh IIfx Reloaded [LIVE]
Branchus Creations |

Creality Ender-3 v2 Bed Levelling Problems

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER