Uploaded October 2019 | Updated September 2026, 13 hours ago
I'm building a solar array on the ground. I like this array because it is inexpensive and easy to build. I'm using salvaged Z-channel (steel), but this design could be used with pressure treated lumber just as easily.
Most solar arrays are anchored to the ground with concrete piers. This is a fantastic system, but concrete can get expensive. Also, my ground is too rocky for a hand-held auger. So making holes would require an excavator. Again, cost would go up.
This system is floating on top of the ground. It needs ballast (weight) on top to keep from blowing away. I'm using a simple triangle frame so the base is huge making it harder to tip over in the wind.
In upcoming videos I'll be installing the panels. I'm moving the solar panels from my front yard to the back yard. If you would like to see my original frame in the front yard I have a video on it. youtu.be/sHy2Mpfzho4
Thanks for watching. If you would like to help support the channel please check out Patreon, or use an affiliate link. Thank you.
patreon.com/DavidPoz
We can chat and share project pictures on facebook: facebook.com/DavidPozEnergy
Amazon Links:
Dewalt Drill: amzn.to/33ft8Z6
Band Saw: amzn.to/2OAfRGC
Band Saw Blades: amzn.to/2MrOWd9
Spray Paint: amzn.to/2AWsqnk
Long Lag Screws: amzn.to/33h9H23
Level: amzn.to/2MFp6Tp
Self-tapping Screws: homedepot.com/p/Teks-14-x-3-4-in-External-Flange-Hex-Washer-Head-Self-Drilling-Screw-70-Pack-21349/205879501
Video Camera: amzn.to/31YLU6x
“As an Amazon Associate I earn from qualifying purchases.”
I'm building a solar array on the ground. I like this array because it is inexpensive and easy to build. I'm using salvaged Z-channel (steel), but this design could be used with pressure treated lumber just as easily.
Most solar arrays are anchored to the ground with concrete piers. This is a fantastic system, but concrete can get expensive. Also, my ground is too rocky for a hand-held auger. So making holes would require an excavator. Again, cost would go up.
This system is floating on top of the ground. It needs ballast (weight) on top to keep from blowing away. I'm using a simple triangle frame so the base is huge making it harder to tip over in the wind.
In upcoming videos I'll be installing the panels. I'm moving the solar panels from my front yard to the back yard. If you would like to see my original frame in the front yard I have a video on it. youtu.be/sHy2Mpfzho4
Thanks for watching. If you would like to help support the channel please check out Patreon, or use an affiliate link. Thank you.
patreon.com/DavidPoz
We can chat and share project pictures on facebook: facebook.com/DavidPozEnergy
Amazon Links:
Dewalt Drill: amzn.to/33ft8Z6
Band Saw: amzn.to/2OAfRGC
Band Saw Blades: amzn.to/2MrOWd9
Spray Paint: amzn.to/2AWsqnk
Long Lag Screws: amzn.to/33h9H23
Level: amzn.to/2MFp6Tp
Self-tapping Screws: homedepot.com/p/Teks-14-x-3-4-in-External-Flange-Hex-Washer-Head-Self-Drilling-Screw-70-Pack-21349/205879501
Video Camera: amzn.to/31YLU6x
“As an Amazon Associate I earn from qualifying purchases.”
