Build the Gemma Translator: No Internet Required @Dronebotworkshop
Build the Gemma Translator: No Internet Required  @Dronebotworkshop
Uploaded August 2026 | Updated November 2026, 4 days ago
Build a stand-alone language translator using a Raspberry Pi 5. I’ll show you how to set up the Google Gemma Translator and add additional languages.

Article with code: dronebotworkshop.com/gemma-translate
More articles and tutorials: dronebotworkshop.com
Join the conversation on the forum: forum.dronebotworkshop.com
Subscribe to the newsletter and stay in touch: dronebotworkshop.com/subscribe

Google recently released one of the coolest projects I have seen in a long time - the Google Gemma Translator. And today we are going to build one.

This translator allows you to speak in one language and listen in another. It features six languages, but I will show you how to add more. And the real miracle is it doesn’t require an Internet connection; it’s a completely stand-alone unit.

Construction of the Gemma Translator is about as simple as it gets. Just plug a USB microphone and a USB speaker into an 8GB Raspberry Pi, and the build is complete. Google does provide an STL file to 3D print a case, but I’m just building it on the workbench.

I’ll show you the step-by-step instructions for assembling the translator, including how to modify its display for a full-size HDMI video monitor (Google's build is formatted for a 480 x 320 screen).

Once we get it together, we’ll try it out. And then we’ll add French to the list of available languages (it's preconfigured with just six, and French wasn’t one of them).

Here is the Table of Contents for today's video:

00:00 - Introduction
01:56 - Google Gemma Translator
08:57 - Building the Translator
18:58 - Adding Other Languages
25:06 - Conclusion

The Gemma Translator is a quick and easy project that can be really useful. If you have an 8GB Raspberry Pi 5 handy, I’d suggest you try it out.

I hope you enjoy the video, and make sure to grab the “cheat sheet” at dronebotworkshop.com/gemma-translate.

Bill
Build the Gemma Translator: No Internet RequiredESP32 Guide 2024 | Choosing and Using an ESP32 BoardArduino Alvik Robot - Makers GuideWLED on ESP32 – Setup Guide (with Audio Reactive)Troubleshooting - What to do when it wont work!Build a Custom Servo Motor with a DC MotorSolving I2C Address Conflicts - TCA9548A I2C MultiplexerAnalog Feedback Servo Motor - Improved Servo PerformanceMultimeters -  The Complete GuideESP32 CAM - 10 Dollar Camera for IoT ProjectsUsing Keypads with Arduino - Build an Electronic LockArduino Programming with XOD #2 - Robot Car
DroneBot Workshop |

Build the Gemma Translator: No Internet Required

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER