Arduino Programming with XOD #2 - Robot Car @Dronebotworkshop
Arduino Programming with XOD #2 - Robot Car  @Dronebotworkshop
Uploaded May 2018 | Updated November 2026, 2 hours ago
Build a Robot Car and program it using XOD, a graphical development environment for the Arduino.

Get XOD at xod.io
Full Article at dronebotworkshop.com/xod-robot-car-1
More articles and tutorials: dronebotworkshop.com
Join the conversation on the forum: forum.dronebotworkshop.com
Subscribe to the newsletter and stay in touch: dronebotworkshop.com/subscribe

This is another video sponsored by the good people at XOD.

Today I’m working with XOD, a graphical IDE that lets you program an Arduino without writing any code. If you’re new to XOD I suggest that you take a look at my previous XOD video at youtu.be/L_FkrZTduVc as well as the article at dbot.ws/xod01 and of course the XOD website at xod.io to get up to speed with this new way to work with your Arduino.

In this video, I will be showing you a couple of new techniques with XOD.

First, we will learn how to use multiple patches in our XOD projects. This will allow us to create our own custom nodes, a powerful technique that also makes our main patch a lot less cluttered.

We will also learn how to use XOD libraries. Today we will see how to add a XOD library to our IDE.

In order to make things more fun, I’ve decided that for this video and the XOD videos that will follow we will build a project - a XOD powered robot car!

In this video, I’ll show you how to assemble the robot car. Our initial design will use an L298N H-Bridge motor controller and a 10mm RGB LED. As the series continues we’ll add more parts to give our robot more capabilities.

Here is what is covered in this video:

00:00 - Introduction
03:32 - XOD Robot Project Intro
07:18 - Robot Car Wiring
11:16 - Making custom node for RGB LED
19:12 - Adding a XOD Library for L298N
26:05 - Sequential Programming Intro
27:42 - RGB LED Sequential Node
44:44 - L298N H-Bridge Sequential Node
51:45 - Robot Demo Sequence

As always you can get additional information as well as the code (.xodball files) used in this video by visiting the article at dbot.ws/xod02.

I hope you enjoy this video and will continue to follow along while I add features to our XOD Robot Car!

If you’d like to have a say in what videos and articles I create for YOU then please join the DroneBot Workshop Newsletter. No spam or sales pitches, the newsletter is my way of keeping in contact with you.

And if you haven’t already please subscribe to this YouTube channel.
Arduino Programming with XOD #2 - Robot CarUsing LCD Displays with ArduinoUnderstanding Arduino Interrupts | Hardware, Pin Change & Timer InterruptsMyoWare Muscle Sensor - Electromyography (EMG) & Robot Arm (failed attempt)!ESP32 Non Volatile Storage - FRAM, Flash & EEPROMLaser vs Ultrasonic - TOF10120 vs. HC-SR04Introduction to ESP32 - Getting StartedBuilding the Elegoo Smart Robot Car Part 1 - Arduino based robotics projectI2C Part 2 - Build a I2C SensorPi Pico W with the Arduino IDE | Using WiFiDriving DC Motors with MicrocontrollersArduino Nano RP2040 Connect - Arduino meets Raspberry Pi
DroneBot Workshop |

Arduino Programming with XOD #2 - Robot Car

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER