Uploaded August 2026 | Updated November 2026, 6 hours ago
Part 4 of the "Build Series -- 2025 DIYnamics Desktop Rotating Table” set of videos, which walk the intrepid DIYnamicist through the construction and operation of the 2025 iteration of the desktop rotating fluid dynamics hardware kit. Here, Bill Church shows how to put together the 3-D printed parts for the motor adapter. With this adapter in hand, it becomes possible to control the LEGO motor with a standard DC power supply, greatly increasing the flexibility of the system. The STL file for 3D printing is linked below. However, if no 3D printing capabilities are on-hand, please do not hesitate to contact us.
Build Series videos:
Part 0 — Overview (youtu.be/DZJyGC2uRfI)
Part 1 — Zip Tie Beam (youtu.be/vXfPEIhIeDo)
Part 2 — Motor Assembly (youtu.be/bZaVveYNtus)
Part 3 — OXO Turntable (youtu.be/AqUD1hDF0FA)
Part 4 — Motor Adapter (youtu.be/hf2GPd054Y4)
Resources:
Instructions PDF — drive.google.com/file/d/1hhUmNNpMVjZ8pZb-n00Uac2Da0n25hVN/view?usp=share_link
Parts list — docs.google.com/spreadsheets/d/1humW6rjMDf6oExEyAj2l_a6tAPHrFmjnLQawJukC50g/edit?usp=share_link
STL files for motor adapter — drive.google.com/file/d/1GoUSvxFy8-c0j3AwW9w6UQEbBrK_eSbJ/view?usp=share_link
Support DIYnamics!: https://giving.ucla.edu/Campaign/Donate.aspx?SiteNum=5385
Contact / Questions: Jon Aurnou (jona@epss.ucla.edu; https://epss.ucla.edu/people/faculty/543/)
Credits:
Design — Bill Church (CRCS; https://www.crcs.works)
Filming — Bill Church
Editing — Bill Church
Discussions & Feedback — Bill Church, Jordyn Moscoso, Jon Aurnou
Part 4 of the "Build Series -- 2025 DIYnamics Desktop Rotating Table” set of videos, which walk the intrepid DIYnamicist through the construction and operation of the 2025 iteration of the desktop rotating fluid dynamics hardware kit. Here, Bill Church shows how to put together the 3-D printed parts for the motor adapter. With this adapter in hand, it becomes possible to control the LEGO motor with a standard DC power supply, greatly increasing the flexibility of the system. The STL file for 3D printing is linked below. However, if no 3D printing capabilities are on-hand, please do not hesitate to contact us.
Build Series videos:
Part 0 — Overview (youtu.be/DZJyGC2uRfI)
Part 1 — Zip Tie Beam (youtu.be/vXfPEIhIeDo)
Part 2 — Motor Assembly (youtu.be/bZaVveYNtus)
Part 3 — OXO Turntable (youtu.be/AqUD1hDF0FA)
Part 4 — Motor Adapter (youtu.be/hf2GPd054Y4)
Resources:
Instructions PDF — drive.google.com/file/d/1hhUmNNpMVjZ8pZb-n00Uac2Da0n25hVN/view?usp=share_link
Parts list — docs.google.com/spreadsheets/d/1humW6rjMDf6oExEyAj2l_a6tAPHrFmjnLQawJukC50g/edit?usp=share_link
STL files for motor adapter — drive.google.com/file/d/1GoUSvxFy8-c0j3AwW9w6UQEbBrK_eSbJ/view?usp=share_link
Support DIYnamics!: https://giving.ucla.edu/Campaign/Donate.aspx?SiteNum=5385
Contact / Questions: Jon Aurnou (jona@epss.ucla.edu; https://epss.ucla.edu/people/faculty/543/)
Credits:
Design — Bill Church (CRCS; https://www.crcs.works)
Filming — Bill Church
Editing — Bill Church
Discussions & Feedback — Bill Church, Jordyn Moscoso, Jon Aurnou










