Uploaded November 2026 | Updated November 2026, 12 hours ago
Part 2: Choices and Tradeoffs in Non-Isolated SMPS Designs
A converter that works on the bench can still lose regulation when a battery sags, a load changes, or the input crosses the output voltage. The key is to choose a topology for the full operating range; not just the nominal numbers. In Part 2 of our series on Switched-Mode Power Supplies (SMPS), we compare four popular topologies; buck, boost, buck-boost, and isolated buck. We discuss when a buck is the natural fit, what to consider at light loads, and why a boost converter’s right-half-plane zero affects its transient response and loop bandwidth. We also look at the input-voltage crossover that calls for buck-boost conversion, a scenario that can be easy to miss in battery-powered designs. RELATED SOLUTIONS: PART 1: Branching Out Beyond the Flyback- An Introduction to SMPS and the Decision Tree: wattsup.libsyn.com/branching-out-beyond-the-flyback SMPS Topologies Tips & Tricks Patch: we-online.com/files/pdf1/smps-topologies-and-tips-and-tricks.pdf Storage Applications: Power Inductors for SMPS Guide: we-online.com/components/media/o470289v410%20Filter-Storage%20Applications.pdf Listen to our PODCAST🎙️: we-online.com/en/news-center/podcast Follow us on LinkedIn: linkedin.com/company/wurth-elektronik (Americas) Follow us on LinkedIn: linkedin.com/company/wuerth-elektronik-group (Europe) Like us on Facebook: facebook.com/WurthElectronics (Americas) Like us on Facebook: facebook.com/Wuerth.Elektronik.Group (Europe) Follow us on X: https://x.com/WurthElectronic/ (Americas) Follow us on X: https://x.com/we_online (Europe) Follow us on Instagram: instagram.com/wurthelectronics (Americas) Würth Elektronik online: we-online.com
Part 2: Choices and Tradeoffs in Non-Isolated SMPS Designs
A converter that works on the bench can still lose regulation when a battery sags, a load changes, or the input crosses the output voltage. The key is to choose a topology for the full operating range; not just the nominal numbers. In Part 2 of our series on Switched-Mode Power Supplies (SMPS), we compare four popular topologies; buck, boost, buck-boost, and isolated buck. We discuss when a buck is the natural fit, what to consider at light loads, and why a boost converter’s right-half-plane zero affects its transient response and loop bandwidth. We also look at the input-voltage crossover that calls for buck-boost conversion, a scenario that can be easy to miss in battery-powered designs. RELATED SOLUTIONS: PART 1: Branching Out Beyond the Flyback- An Introduction to SMPS and the Decision Tree: wattsup.libsyn.com/branching-out-beyond-the-flyback SMPS Topologies Tips & Tricks Patch: we-online.com/files/pdf1/smps-topologies-and-tips-and-tricks.pdf Storage Applications: Power Inductors for SMPS Guide: we-online.com/components/media/o470289v410%20Filter-Storage%20Applications.pdf Listen to our PODCAST🎙️: we-online.com/en/news-center/podcast Follow us on LinkedIn: linkedin.com/company/wurth-elektronik (Americas) Follow us on LinkedIn: linkedin.com/company/wuerth-elektronik-group (Europe) Like us on Facebook: facebook.com/WurthElectronics (Americas) Like us on Facebook: facebook.com/Wuerth.Elektronik.Group (Europe) Follow us on X: https://x.com/WurthElectronic/ (Americas) Follow us on X: https://x.com/we_online (Europe) Follow us on Instagram: instagram.com/wurthelectronics (Americas) Würth Elektronik online: we-online.com










