Uploaded August 2026 | Updated November 2026, 2 hours ago
The bash plate on my B50 is a home made version that came back to the UK when the bike was re-imported from the USA. It's very strong and wraps around the primary chain case, so well worth keeping. Refitting it recently, the feeble 1/4" thread in the frame stripped. Time to beef up these fastenings to make the plate even stronger & easier to fit in future.
My only concern is whether the bigger screws increase the risk of damage to the frame, given that they won't sacrificially shear off as easily as the 1/4" ones would have done(?)
The bash plate on my B50 is a home made version that came back to the UK when the bike was re-imported from the USA. It's very strong and wraps around the primary chain case, so well worth keeping. Refitting it recently, the feeble 1/4" thread in the frame stripped. Time to beef up these fastenings to make the plate even stronger & easier to fit in future.
My only concern is whether the bigger screws increase the risk of damage to the frame, given that they won't sacrificially shear off as easily as the 1/4" ones would have done(?)










