Uploaded April 2026 | Updated November 2026, 3 hours ago
This video documents the meticulous restoration of a very rare Parkinson’s ball base swivel vise. Following a surge in subscribers, the creator shares the process of transforming this unique tool from a damaged state to a pristine shelf-piece.
Key Restoration Highlights:
Disassembly and Cleaning: The process begins with stripping down the dynamic jaw and navigating the complex double-nut locking mechanism underneath the ball base [00:30].
Precision Repairs: Two major issues are addressed on the jaw:
Extracting a Broken Screw: The creator demonstrates a careful drilling technique, gradually increasing bit sizes to remove a snapped screw without damaging the internal threads [01:28].
Structural Repair: A large missing chunk of the jaw is repaired using epoxy, which is left to cure for 24 hours before being sanded down to a seamless finish [02:59].
Painting and Finishing: The vise is primed and then finished with Balmoral Red topcoat in a spray booth at 65°C to ensure a durable, professional finish [03:42].
Reassembly: The creator meticulously oils and reassembles the components, including the internal spring and split pin, while being careful not to mark the fresh paint [04:08].
The final result is a fully functional and aesthetically striking tool that has been preserved for long-term display [06:55].
This video documents the meticulous restoration of a very rare Parkinson’s ball base swivel vise. Following a surge in subscribers, the creator shares the process of transforming this unique tool from a damaged state to a pristine shelf-piece.
Key Restoration Highlights:
Disassembly and Cleaning: The process begins with stripping down the dynamic jaw and navigating the complex double-nut locking mechanism underneath the ball base [00:30].
Precision Repairs: Two major issues are addressed on the jaw:
Extracting a Broken Screw: The creator demonstrates a careful drilling technique, gradually increasing bit sizes to remove a snapped screw without damaging the internal threads [01:28].
Structural Repair: A large missing chunk of the jaw is repaired using epoxy, which is left to cure for 24 hours before being sanded down to a seamless finish [02:59].
Painting and Finishing: The vise is primed and then finished with Balmoral Red topcoat in a spray booth at 65°C to ensure a durable, professional finish [03:42].
Reassembly: The creator meticulously oils and reassembles the components, including the internal spring and split pin, while being careful not to mark the fresh paint [04:08].
The final result is a fully functional and aesthetically striking tool that has been preserved for long-term display [06:55].










![$1 broken vise epoxy fix restoration
$1 vise rescue .... impossible destroyed vise saved
This video documents the ambitious restoration of a vintage vice purchased for just 99 pence. The project tackles significant damage, including a massive crack and missing metal, using epoxy and automotive body filler to bring the tool back from the brink of the scrap heap.
Throughout the process, youll see a deep dive into rust removal using chemical de-oxidisers, mechanical cleaning on the wire wheel, and the technical challenges of matching metallic paints. The restoration culminates in a stress test where the repaired jaws are put under pressure to see if the epoxy fix can actually hold up to real-world workshop use.
In this video, youll see:
Technical Repairs: Using Gorilla epoxy and acid etching to bond fractured cast iron.
Refining the Surface: Applying two-part body filler and fine-sanding to hide repair seams.
Painting Challenges: A struggle with paint matching between different batches of deep copper metallic spray.
Functional Testing: A final pressure test squashing copper pipe to verify the strength of the structural repair.
Video Chapters
[00:00] Initial Inspection of the 99p Broken Vice
[01:41] Teardown and Degreasing
[02:53] Chemical Rust Removal (12-Hour Soak)
[04:57] Repairing the Crack with Gorilla Epoxy
[07:58] Initial Painting & Identifying Visible Seams
[10:32] Applying Body Filler for a Seamless Finish
[12:02] Priming and the Deep Copper Paint Struggle
[15:52] Final Reassembly and Results
[17:06] Jaw Pressure Stress Test
Hashtags
#restoration #toolrestoration #workshop #vice #diy #metalworking #vintagetools
... $1 broken vise epoxy fix restoration](https://i.ytimg.com/vi/wNiaYTRX7gA/mqdefault.jpg)