Uploaded July 2025 | Updated November 2026, 3 hours ago
$1 vise rescue .... impossible destroyed vise saved
This video documents the ambitious restoration of a vintage vice purchased for just 99 pence. The project tackles significant damage, including a massive crack and missing metal, using epoxy and automotive body filler to bring the tool back from the brink of the scrap heap.
Throughout the process, you'll see a deep dive into rust removal using chemical de-oxidisers, mechanical cleaning on the wire wheel, and the technical challenges of matching metallic paints. The restoration culminates in a "stress test" where the repaired jaws are put under pressure to see if the epoxy fix can actually hold up to real-world workshop use.
In this video, you'll see:
Technical Repairs: Using Gorilla epoxy and acid etching to bond fractured cast iron.
Refining the Surface: Applying two-part body filler and fine-sanding to hide repair seams.
Painting Challenges: A struggle with paint matching between different batches of "deep copper" metallic spray.
Functional Testing: A final pressure test squashing copper pipe to verify the strength of the structural repair.
Video Chapters
[00:00] Initial Inspection of the 99p Broken Vice
[01:41] Teardown and Degreasing
[02:53] Chemical Rust Removal (12-Hour Soak)
[04:57] Repairing the Crack with Gorilla Epoxy
[07:58] Initial Painting & Identifying Visible Seams
[10:32] Applying Body Filler for a Seamless Finish
[12:02] Priming and the "Deep Copper" Paint Struggle
[15:52] Final Reassembly and Results
[17:06] Jaw Pressure Stress Test
Hashtags
#restoration #toolrestoration #workshop #vice #diy #metalworking #vintagetools
...
$1 vise rescue .... impossible destroyed vise saved
This video documents the ambitious restoration of a vintage vice purchased for just 99 pence. The project tackles significant damage, including a massive crack and missing metal, using epoxy and automotive body filler to bring the tool back from the brink of the scrap heap.
Throughout the process, you'll see a deep dive into rust removal using chemical de-oxidisers, mechanical cleaning on the wire wheel, and the technical challenges of matching metallic paints. The restoration culminates in a "stress test" where the repaired jaws are put under pressure to see if the epoxy fix can actually hold up to real-world workshop use.
In this video, you'll see:
Technical Repairs: Using Gorilla epoxy and acid etching to bond fractured cast iron.
Refining the Surface: Applying two-part body filler and fine-sanding to hide repair seams.
Painting Challenges: A struggle with paint matching between different batches of "deep copper" metallic spray.
Functional Testing: A final pressure test squashing copper pipe to verify the strength of the structural repair.
Video Chapters
[00:00] Initial Inspection of the 99p Broken Vice
[01:41] Teardown and Degreasing
[02:53] Chemical Rust Removal (12-Hour Soak)
[04:57] Repairing the Crack with Gorilla Epoxy
[07:58] Initial Painting & Identifying Visible Seams
[10:32] Applying Body Filler for a Seamless Finish
[12:02] Priming and the "Deep Copper" Paint Struggle
[15:52] Final Reassembly and Results
[17:06] Jaw Pressure Stress Test
Hashtags
#restoration #toolrestoration #workshop #vice #diy #metalworking #vintagetools
...










