Uploaded November 2023 | Updated November 2026, 3 hours ago
Stremaform® stay-in-place formwork for underwater construction of a bridge pier
Conventional formwork systems reach their limits when constructed underwater due to the high amount of manual labour required. Stremaform® enables considerable time savings during immersion operations and simplifies underwater construction and concreting work.
During the construction of a bridge pier for the bridge connecting Nerlandsøya and Bergsøya in Norway, formwork below the water surface was constructed entirely with Stremaform®, while conventional formwork was used above the waterline.
The Stremaform® sections were delivered prefabricated and erected on site. The construction of rounded corners also posed no problems, as this was easily possible using Stremaform®. Glass fibre anchor rods were used to secure the concrete pressure without affecting the concrete cover.
The entire pre-assembled Stremaform® formwork, including the reinforcement, was finally placed on a prefabricated foundation on the seabed, where the concrete was then poured.
Thanks to Metrostav Norge AS and Bertelsen&Garpestad AS for the great photos of the construction site!
More information:
_______________________________________
maxfrank.com/stremaform
Social media:
_______________________________________
Youtube: youtube.com/@MAXFRANKGroup
LinkedIn: linkedin.com/company/max-frank-group
Instagram: instagram.com/accounts/login/?next=/maxfrankgroup
Contact:
_______________________________________
Max Frank GmbH & Co. KG
Mitterweg 1
DE-94339 Leiblfing
Tel: +49 9427 189-0
info@maxfrank.de
maxfrank.com
MAX FRANK as a company:
________________________________________
We have been developing, producing and distributing a wide range of proven products for concrete and reinforced concrete construction for over half a century. We accompany our customers reliably through every building phase with a technically sophisticated and intensive intermeshing of industrial production, high-quality products and multifaceted services.
That is why we develop individual project solutions in an open dialogue with our partners. We are using innovations in structural physics geared toward longer life cycles and sustainability and we are striving to offer more efficient processes. We are assisted in this by our ability to listen attentively and ask the right questions, because good questions open up those involved in the construction to productive thinking processes and discussions beyond isolated views and prejudice. Questions that penetrate to the core of the task and help to gain new insights and stake off more and more common terrain.
We at MAX FRANK call that: BUILDING COMMON GROUND
Stremaform® stay-in-place formwork for underwater construction of a bridge pier
Conventional formwork systems reach their limits when constructed underwater due to the high amount of manual labour required. Stremaform® enables considerable time savings during immersion operations and simplifies underwater construction and concreting work.
During the construction of a bridge pier for the bridge connecting Nerlandsøya and Bergsøya in Norway, formwork below the water surface was constructed entirely with Stremaform®, while conventional formwork was used above the waterline.
The Stremaform® sections were delivered prefabricated and erected on site. The construction of rounded corners also posed no problems, as this was easily possible using Stremaform®. Glass fibre anchor rods were used to secure the concrete pressure without affecting the concrete cover.
The entire pre-assembled Stremaform® formwork, including the reinforcement, was finally placed on a prefabricated foundation on the seabed, where the concrete was then poured.
Thanks to Metrostav Norge AS and Bertelsen&Garpestad AS for the great photos of the construction site!
More information:
_______________________________________
maxfrank.com/stremaform
Social media:
_______________________________________
Youtube: youtube.com/@MAXFRANKGroup
LinkedIn: linkedin.com/company/max-frank-group
Instagram: instagram.com/accounts/login/?next=/maxfrankgroup
Contact:
_______________________________________
Max Frank GmbH & Co. KG
Mitterweg 1
DE-94339 Leiblfing
Tel: +49 9427 189-0
info@maxfrank.de
maxfrank.com
MAX FRANK as a company:
________________________________________
We have been developing, producing and distributing a wide range of proven products for concrete and reinforced concrete construction for over half a century. We accompany our customers reliably through every building phase with a technically sophisticated and intensive intermeshing of industrial production, high-quality products and multifaceted services.
That is why we develop individual project solutions in an open dialogue with our partners. We are using innovations in structural physics geared toward longer life cycles and sustainability and we are striving to offer more efficient processes. We are assisted in this by our ability to listen attentively and ask the right questions, because good questions open up those involved in the construction to productive thinking processes and discussions beyond isolated views and prejudice. Questions that penetrate to the core of the task and help to gain new insights and stake off more and more common terrain.
We at MAX FRANK call that: BUILDING COMMON GROUND










