Boombox Function Switch Cleaning And Polishing @OldSchoolElectronics
Boombox Function Switch Cleaning And Polishing  @OldSchoolElectronics
Uploaded August 2017 | Updated November 2026, 3 hours ago
Here I try out a product called Nevr-Dull, which I bought for polishing aluminum. Great care must be taken not to bend the "riding" contacts. These contacts can just be pulled off. Also, they bend very easily. I did not have a light electrical grease, so I just used a contact cleaner with lube, which leaves an oily film which then is the lubricant. I m not sure if car battery grease would have worked; it might be too thick.

Items used: cotton swabs (Q-Tips), isopropyl alcohol, contact cleaner with lubrication, small screwdrivers, small needle-nosed pliers, soldering iron, solder, flux.
Boombox Function Switch Cleaning And PolishingChecking Record Player (turntable) Cartridge OutputJVC RC-727 Bias Frequency And Current AdjustmentThe Oscilloscope Beam Finder Switch (beginners video)Hitachi HA-270 Stereo Amplifier   Bias and BulbsLeader LTC-905 Curve TracerLeader LP-11 In-Circuit Probe For Leader LTC-905 Curve TracerMarantz 2215B Stereo Receiver Lights PART 1Quick Test Of Receiver With Keuwlsoft Function Generator AppSharp GF-9595 Belts and Pinch Roller ReplacementFront Panel Marantz 2215B (threaded insert removal)Sharp GF- 9191 Motor
Old School |

Boombox Function Switch Cleaning And Polishing

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER