Uploaded September 2026 | Updated November 2026, 3 days ago
Learn how to use Blender with a 3D face scan to create a custom-fit mask or body extension that can be sculpted and 3D printed.
In this Blender tutorial, I start with a low-poly retopology shell and fit it precisely to a scanned face. You’ll learn how to clean up scan imperfections, reposition vertices with face snapping, use the Shrinkwrap modifier for an accurate fit, smooth the surface with Subdivision Surface, and add printable thickness using the Solidify modifier.
I also demonstrate how to preserve an editable version of your mask before applying modifiers, then use Blender’s sculpting tools to add raised forms, textures, bolts, and other body-extension details. Finally, we export the completed sculpture as an STL file ready for slicing and 3D printing.
This workflow is useful for custom masks, wearable sculpture, prosthetic-style forms, cosplay, body extensions, digital fabrication, and other projects where a modeled object needs to conform closely to a 3D scan.
In this tutorial:
- Fit a retopologized mask to a 3D face scan
- Use Face Project snapping to adjust vertices
- Clean unwanted hair and scan artifacts with Sculpt Mode
- Use Shrinkwrap with Target Normal Project
- Offset the mask slightly above the scanned surface
- Edit the base mesh while previewing Shrinkwrap
- Add and repair topology where needed
- Smooth the mask with Subdivision Surface
- Add physical thickness with Solidify
- Set an appropriate wall thickness for 3D printing
- Preserve an editable modifier-based version
- Apply modifiers to create sculptable geometry
- Sculpt additional forms and surface details
- Export the finished mask as an STL for 3D printing
Chapters
00:00 Creating a mask from a 3D face scan
00:49 Adding the Shrinkwrap modifier
01:59 Shrinkwrapping the mask to the face
03:34 Adding Subdivision Surface
04:38 Adding thickness with Solidify
05:44 Preparing the mask for sculpting
06:58 Exporting the finished mask as an STL
This workflow gives you a flexible base for creating custom 3D printed masks, wearable sculptures, and body or face extensions directly from 3D scan data in Blender.
#Blender #3DPrinting #3DScanning #Retopology #BlenderTutorial
youtube.com/channel/UCmGXH-jy0o2CuhqtpxbaQgA/join
Learn how to use Blender with a 3D face scan to create a custom-fit mask or body extension that can be sculpted and 3D printed.
In this Blender tutorial, I start with a low-poly retopology shell and fit it precisely to a scanned face. You’ll learn how to clean up scan imperfections, reposition vertices with face snapping, use the Shrinkwrap modifier for an accurate fit, smooth the surface with Subdivision Surface, and add printable thickness using the Solidify modifier.
I also demonstrate how to preserve an editable version of your mask before applying modifiers, then use Blender’s sculpting tools to add raised forms, textures, bolts, and other body-extension details. Finally, we export the completed sculpture as an STL file ready for slicing and 3D printing.
This workflow is useful for custom masks, wearable sculpture, prosthetic-style forms, cosplay, body extensions, digital fabrication, and other projects where a modeled object needs to conform closely to a 3D scan.
In this tutorial:
- Fit a retopologized mask to a 3D face scan
- Use Face Project snapping to adjust vertices
- Clean unwanted hair and scan artifacts with Sculpt Mode
- Use Shrinkwrap with Target Normal Project
- Offset the mask slightly above the scanned surface
- Edit the base mesh while previewing Shrinkwrap
- Add and repair topology where needed
- Smooth the mask with Subdivision Surface
- Add physical thickness with Solidify
- Set an appropriate wall thickness for 3D printing
- Preserve an editable modifier-based version
- Apply modifiers to create sculptable geometry
- Sculpt additional forms and surface details
- Export the finished mask as an STL for 3D printing
Chapters
00:00 Creating a mask from a 3D face scan
00:49 Adding the Shrinkwrap modifier
01:59 Shrinkwrapping the mask to the face
03:34 Adding Subdivision Surface
04:38 Adding thickness with Solidify
05:44 Preparing the mask for sculpting
06:58 Exporting the finished mask as an STL
This workflow gives you a flexible base for creating custom 3D printed masks, wearable sculptures, and body or face extensions directly from 3D scan data in Blender.
#Blender #3DPrinting #3DScanning #Retopology #BlenderTutorial
youtube.com/channel/UCmGXH-jy0o2CuhqtpxbaQgA/join










