Uploaded September 2026 | Updated November 2026, 2 days ago
What a bitcrusher actually does to your voice. It takes away the numbers your recording is made of, and there are two different ways to do it. The breakdown:
YOUR VOICE IS A LIST OF NUMBERS
To record you, your computer measures where your sound wave is thousands of times a second, usually 48,000. Each measurement is a sample, and every sample is a number.
BITS: HOW PRECISE EACH NUMBER IS
Bit depth is how many values a sample is allowed to be. 16 bits gives 65,536, and every bit you remove cuts that in half, so 8 bits is 256 and 4 bits is 16. With fewer values your voice has to snap to the nearest one, and the difference between where your voice really was and where it snapped is heard as grit. On my voice at 8 bits that grit sits about 24 dB under me. At 4 bits it's as loud as I am, which is why the voice falls apart.
RATE: HOW MANY NUMBERS PER SECOND
A sample rate can only hold sounds up to half of itself, so at 8,000 samples a second nothing above 4,000 Hz can be written down properly. A bitcrusher like Patchd's doesn't filter those high sounds out first, so they get measured wrong and fold back down below 4,000 as tones that were never in your voice. That's why a low rate sounds metallic instead of just dull.
TWO KINDS OF BROKEN
Fewer bits add grit that follows your voice. A lower rate adds new tones. If you want a crunchy, gritty voice, lower the bits. If you want a harsh, metallic one, lower the rate.
ONE THING TO WATCH
Very low bit settings can round a quiet voice down to nothing. On my take, 2 bits turned a whole phrase into silence, so if your voice disappears, turn the bits back up or feed it in louder.
Save this for the next time you want your voice to sound broken on purpose.
Join Patchd waitlist or beta. Link in bio.
#audioengineering #sounddesign #bitcrusher #lofi #voiceeffects #mixingvocals #producertips
What a bitcrusher actually does to your voice. It takes away the numbers your recording is made of, and there are two different ways to do it. The breakdown:
YOUR VOICE IS A LIST OF NUMBERS
To record you, your computer measures where your sound wave is thousands of times a second, usually 48,000. Each measurement is a sample, and every sample is a number.
BITS: HOW PRECISE EACH NUMBER IS
Bit depth is how many values a sample is allowed to be. 16 bits gives 65,536, and every bit you remove cuts that in half, so 8 bits is 256 and 4 bits is 16. With fewer values your voice has to snap to the nearest one, and the difference between where your voice really was and where it snapped is heard as grit. On my voice at 8 bits that grit sits about 24 dB under me. At 4 bits it's as loud as I am, which is why the voice falls apart.
RATE: HOW MANY NUMBERS PER SECOND
A sample rate can only hold sounds up to half of itself, so at 8,000 samples a second nothing above 4,000 Hz can be written down properly. A bitcrusher like Patchd's doesn't filter those high sounds out first, so they get measured wrong and fold back down below 4,000 as tones that were never in your voice. That's why a low rate sounds metallic instead of just dull.
TWO KINDS OF BROKEN
Fewer bits add grit that follows your voice. A lower rate adds new tones. If you want a crunchy, gritty voice, lower the bits. If you want a harsh, metallic one, lower the rate.
ONE THING TO WATCH
Very low bit settings can round a quiet voice down to nothing. On my take, 2 bits turned a whole phrase into silence, so if your voice disappears, turn the bits back up or feed it in louder.
Save this for the next time you want your voice to sound broken on purpose.
Join Patchd waitlist or beta. Link in bio.
#audioengineering #sounddesign #bitcrusher #lofi #voiceeffects #mixingvocals #producertips










